Replaces

Acura MDX Honda Pilot Steering & Suspension Kit - 1ASFK05536

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

 

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Strut & Spring Assemblies
  • Kit Includes: (2) Front Outer Tie Rods
  • Quantity: 8 Piece Set

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (1:05)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
    • If the wheel is frozen in place, kick the tire to loosen it
  2. step : Removing the Stabilizer Link (1:41)
    • Apply penetrating oil to the stabilizer link bolts
    • Attach an 18mm wrench to the back of the top stabilizer link bolt
    • Remove the top 18mm nut with a socket and ratchet
    • Pull out the top stabilizer link stud
    • Attach an 18mm wrench to the back of the bottom stabilizer link bolt
    • Remove the bottom 18mm nut with a second 18mm wrench
    • Pull out the stabilizer link
  3. step : Installing the New Stabilizer Link (3:30)
    • Push the lower stabilizer link stud into place
    • Push the upper stabilizer link stud into place
    • Start the two 18mm nuts
    • Tighten the nuts to between 55 - 60 foot-pounds of torque
  4. step : Reattaching the Wheel (4:05)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 95 - 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2002Acura MDX Acura MDX 8 Piece Set Steering & Suspension Kit
2003-2005Honda Pilot Honda Pilot 8 Piece Set Steering & Suspension Kit
Part #: 1ASFK05536


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:51 min)