Replaces

Acura MDX Honda Pilot Brake Kit Nakamoto MD865, 42510-S3V-A01 - 1ABFS00353

Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Brake Pad Friction Material: Semi-Metallic
  • Kit Includes:
    (1) Rear Semi-Metallic Brake Pad Set
    (2) Rear Replacement Brake Rotors
  • Brake Pad Features & Benefits:
    OE Grade Multi-Layer Shim
    Positive Mold Technology
    Environmentally Compliant

This rear brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade SEMI-METALLIC Disc Brake Pads
  • 4 Piece REAR brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a PAIR
  • Fits LH (Driver Side) & RH (Passenger Side) REAR
  • Direct replacements
  • Fits 5 Lug wheels
  • Replaces dealer part numbers: 42510-S3V-A01, 42510S3VA01

This rear brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:17)
    • Use the key socket
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:30)
    • Remove the two 12mm slide pin bolts
    • Remove the bolts with a ratcheting wrench
    • Lift the caliper off
    • Secure the caliper out of the way with a bungee cord
    • Check the movement of the slide pins
    • Slide the brake pads out
    • Remove the 14mm caliper bracket bolts
    • Remove the caliper bracket
  3. step : Removing the Rotor (4:33)
    • Remove the Phillips head screws from the rotor
    • Make sure the parking brake is released
    • If the rotor is stuck, use an 8mm x 1.25 bolt
    • Remove the rotor
  4. step : Preparing the Rotor, Pads, and Caliper (8:10)
    • Clean off the hub with a wire brush
    • Clean both sides of the rotor with brake parts cleaner
    • Tighten the Phillips head screws to the rotor
    • Apply grease to the caliper bracket slides if needed
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
  5. step : Reinstalling the Caliper Bracket, Rotor, and Brake Pads (14:12)
    • Insert the caliper bracket onto the rotor
    • Hand-tighten the bolts
    • Insert the brake pads onto the bracket
    • Place an old brake pad into the caliper
    • Press the brake pad into the piston with a c-clamp
    • Insert the caliper to the caliper bracket
    • Hand-tighten the bolts
    • Torque the bracket bolts to 41 foot-pounds
    • Torque the slide pin bolts to 27 foot-pounds
  6. step : Reattaching the Wheel (18:32)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Large C-Clamp

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 19mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Great Kit
The kit was received in good shape -- Replacement was relatively easy, the parts fit perfectly. The brakes work great.
January 5, 2018
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2001-2006Acura MDX Acura MDX Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
2003-2008Honda Pilot Honda Pilot Rear Premium Posi Semi-Metallic Brake Kit Nakamoto

This part replaces:

  • Nakamoto MD865, 42510-S3V-A01
Part #: 1ABFS00353


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: MD865, 42510-S3V-A01

How-to Video:

(19:26 min)