Replaces

Acura MDX Honda Odyssey Brake Kit Nakamoto CD793, 31275-DSZ - 1APBS00009

Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Front Brake Rotor Specifications:
    Vented
    5 Lug
    11.81" (300mm)
  • Brake Pad Friction Material: Ceramic
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Rotor Coating: Zinc Coated
  • Kit Includes:
    (1) Front Ceramic Brake Pad Set
    (2) Front Performance Brake Rotors
  • Product Line: Performance
  • Brake Pad Features & Benefits:
    OE Grade Multi-Layer Shim
    Positive Mold Technology
    Environmentally Compliant
    Thermal Scorched

This performance brake rotor & posi pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • 4 Piece FRONT Brake Pad Set
  • Includes shims
  • Direct replacements
  • Premium Posi Ceramic brake pads

Brake Rotor Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side FRONT
  • Cross drilled, Slotted, And Zinc Coated
  • Replaces dealer part numbers: 45251 S0X 000, 45251S0X000, 45251 TA6 A00, 45251TA6A00
  • Fits 5 Stud Wheels
  • Vented
  • 11.8" (300mm) diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:54)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
    • If necessary, kick the tire to loosen the wheel
  2. step : Inspecting the Brakes (1:30)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (2:12)
    • Remove the two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pull off the brake pads by hand
  4. step : Removing the Brake Rotor (3:22)
    • Remove the two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the screws from the brake rotor with an impact screwdriver
    • If you cannot remove the screws, drill them out
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (5:58)
    • Slide the rotor on
    • Insert the screws into the new rotor
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Check that the caliper slides move freely
    • Clean the brake pad slides with a wire brush
    • Put the bracket back into place
    • Start the two 18mm bolts by hand
    • Tighten the 18mm bolts to between 85 - 90 foot-pounds of torque
  6. step : Installing the New Brake Pads (7:44)
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten the 14mm bolts to between 18 - 20foot-pounds
    • Clean the rotor with brake parts cleaner or mineral spirits
  7. step : Reattaching the Wheel (9:07)
    • Turn the rotor straight
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 95 - 100 foot-pounds in a crossing or star pattern
  8. step : Testing the Brakes (9:44)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 1/4 Inch Drill Bit
  • Drill

  • General Tools

  • Floor Jack
  • Large C-Clamp
  • Jack Stands
  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Impact Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 18mm Socket

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Great service and product
I was needing to replace the rotors and pads on my Honda. As i was searching i saw the 1A website clicked on it and made my purchase. The website is very informational and the product was as described. Will purchase from 1A Auto again
May 27, 2018
Purchased
4 months ago
Great purchase
I definetly will recommend A1auto for your car's need. The front and rear disc were perfect fit for my jeep liberty; very satisfied , will buy again
May 26, 2018
Purchased
4 months ago
Odyssey Brake Kit
I ordered these items on Friday and Saturday morning they were delivered. Exactly what I needed. Was able to do the job ahead of schedule. The quality is great and so is the price. I will continue to shop at 1A Auto in the future. Thank you for you great service.
May 10, 2018
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2001-2002Acura MDX Acura MDX Front Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
1999-2004Honda Odyssey Honda Odyssey Front Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD793, 31275-DSZ
Part #: 1APBS00009


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD793, 31275-DSZ

How-to Video:

(10:17 min)