In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Pre-assembled, loaded strut & spring assemblies allow for a quicker, safer install than replacing with just bare struts. 

Trouble-Free Install

Trouble-free install includes the matched parts needed to get the job done. New mounts, bearings, springs and hardware will provide a better ride for your vehicle and save you time from not having to do the job again because a used part failed afterwards.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
2001 acura tl
Changed all 4 struts, upper control arms, and sway bar links at 190k miles. Parts were shipped fast, arrived in good condition and look to be high quality. Car rides nice, so far so good.
November 13, 2017
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 9 answers
Will these work on the type s model?
Tavaris C on Aug 3, 2016
BEST ANSWER: Sorry we have the T. i have no Idea about your S. That's a question for the manufacturer of the shocks or maybe 1A Auto Sales Support
Who is the manufacturer?
Fredrick T on Nov 14, 2017
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.
Are the struts gas or oil filled?
gregory on Jan 26, 2016
BEST ANSWER: Hello, These are the same as the OEM struts. I believe these models were gas charged.
Are these gas charged struts ?
Vince G on Sep 5, 2017
BEST ANSWER: Yes, these are gas charged struts!
What's the height of the vehicle with these struck and shocks?
That_potatoguy on Feb 11, 2017
BEST ANSWER: The height of the vehicle once these parts are installed should match the factory ride height. You will notice that the vehicle is a few inches higher once they are installed due to the springs not being settled.

Vehicle Fit

  • 2001-2003 Acura CL Front & Rear Strut & Spring Assembly 4 Piece Set
  • 1999-2003 Acura TL Front & Rear Strut & Spring Assembly 4 Piece Set

This part replaces:

  • Monroe 181691L
  • Monroe 181691R
  • Monroe 181299
  • Monroe 171691L
  • Monroe 171691R
  • Monroe 171299
Part #: 1ASSP00934