Acura CL Honda Accord Windshield Wiper Transmission Linkage - 1AWWT00015

Snow, ice, dirt, and dust can interfere or damage your windshield wipers and the motion transmission mechanism. A bent or damaged link can cause the wipers to not work or work incompletely. These parts will also cause an annoying squeaking when they wear out. In general replacing windshield wiper transmission parts is not difficult. This may vary on some applications. It requires basic tools and removal and installation of small body parts such as cowl vent grilles. This replacement wiper transmission connecting rod may be just what you need to get your windshield wiper system working properly again.

This wiper transmission features the following specifications:

  • Fits between windshield wiper motor and wiper arms
  • Replaces dealer part numbers: 76530-SV4-A01, 76530SV4A01
  • Direct bolt on
  • Built to strict quality control standards
  • Stamped construction
  • Complete assembly
  • Includes knurls that wiper arms attach to

This wiper transmission makes a great replacement and allows you to get your windshield wiper system working correctly again.

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wiper arms (0:55)
    • Pop the hood and secure it.
    • Unbolt the nuts and remove the wiper blades.
  2. step : Remove the windshield wiper transmission linkage (1:22)
    • Remove the push clips securing the windshield plastic cover.
    • Pull the cover up and back.
    • Remove four 10 mm bolts anchoring the wiper motor.
    • Unbolt the filter so you can remove the wiper motor.
    • Unplug the wiring harness and remove the wiper motor and transmission linkage.
  3. step : install the new wiper transmission linkage (5:01)
    • Pry up and unbolt the wiper motor from the old linkage and install it on the new one.
    • Install the wiper transmission linkage by bolting it in with your 10 mm socket and ratchet.
    • Plug in the wiring harness and bolt back in the little filter.
    • Clip the plastic cover back on.
    • Bolt the wiper blade arms back on.

Tools needed for replacement:

    General Tools

  • Hammer

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 12mm Socket
  • 10mm Socket

4.5 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
all was on spot.very happy with you,r service. thank you. jay
September 13, 2017
wiper trans
easy to install and works great just followed instruction on your video
August 24, 2017
1 year ago
Just what I needed
After surviving almost flooding out twice while driving home, now my windshield wiper go out on my during my drive home in a thunderstorm. I was hoping it was a simple blown fuse. No such luck. After a little troubleshooting via YouTube, I found that I needed the linkage. Just so happen that the video I used for troubleshooting was made by 1Aauto. Order the part, it was a perfect fit and easy to install. Thanks 1A Auto.
July 14, 2017
1 year ago
The product seemed to work correctly but I must say I was very dissatisfied with the delivery option of sending it the last 3 miles by the USPS instead of UPS with was used the entire way except the last 3 miles. The box was damaged when it arrived as I feared it would be since they sent it to the post office. The linkage looked a little bent but nothing major so I installed it anyway because I was without wipers and the weather here was rainy of course. I have pictures that I will gladly submit showing the damaged boxes....
March 7, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1997-1999Acura CL Acura CL Windshield Wiper Transmission Linkage
1994-1997Honda Accord Honda Accord Windshield Wiper Transmission Linkage

This part replaces:

  • Hollander 621-54150
  • Dorman 602-506
  • OE # 76530SV4A01
Part #: 1AWWT00015

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(12:11 min)