Acura CL Honda Accord Distributor - 1AEDI00021

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This NEW replacement Ignition distributor is just what you need to get your vehicle up and working again!

This distributor features the following specifications:

  • Brand new components, not rebuilt
  • 1 Connector a 4 pin rectangular connector
  • Replaces distributors with housing marking: D4T9607 or D4T9703 Hitachi.
  • Complete unit including ignition module, cap, and rotor
  • Improved steel bearings for better longevity
  • Better heat resistant ignition module
  • 100% tested
  • No core charge

All components are marked and verified as NEW.

This Ignition distributor makes a great replacement and has substantial cost savings over a dealer unit.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Engine Distributor (0:51)
    • Mark the spark plug wires for future reference. Mark the top one Number 1. Go around clockwise ending with 4
    • Unplug the spark plug wires by turning and pulling them. Push them out of the way
    • Remove the 12mm bolt from under the engine distributor
    • Separate the lead attached to the distributor by pinching the clip
    • Remove the 12mm bolt on the left of the distributor
    • Pull the distributor free
    • Place a paper towel under the hole to catch any oil
  2. step : Installing the New Distributor (3:15)
    • Turn the rotor into the same position as it is on the old rotor
    • Line up the distributor and push it into place
    • Replace the two 12mm bolts on either side of the distributor. Tighten to 10ft/lbs
    • Reconnect the lead
    • Reconnect the spark plug wires

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Paper Towels

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 12mm Socket

4.67/ 5.0
12 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Works like a charm only better. Just install and go
August 27, 2015
Worst quality distributor, they even deleted my last bad review
No wonder they dont have bad reviews, because they delete them immediately. And you call yourselves a good company. You should be ashamed of yourselves. My distributor didnt even last a month and the replacement they sent lasted even less. They gave me the excuse that Hondas ignition sometimes go bad. I didnt start having this stalling problem until i installed this distributor. My mechanic also found out that the coil in it is cheap quality and wouldnt spark. Never buying from here again.
May 7, 2016
Great fast excellent service fast shipping plain answer short I great a+++++
January 30, 2017
Easy Peasy
Arrived well packaged, fit like a glove... aside from user error... my lack of appropriate socket extensions, etc. an easy installation... and now Honda response is like a teenager!
March 23, 2017
Bought distributor for 2002 Honda Accord and I am very happy. It was delivered on time and I would defintely recommend 1A Auto my family and friends.
March 23, 2017
Great product
I needed a distributor asap and most were around the $231 price range so to be able to find one here that was a good price and actually in great condition was a godsend
July 16, 2017
distributor works fine
The distributor arrived in about one week. It was a straight-forward installation (there is a video one 1AAutos website and more on youtube) and is working fine so far. I dont know how it will hold up over time but Im giving it the benefit of the doubt...and 5 stars. The price was very good relative to auto supply stores (about $140 less in my case). No sales tax either.
September 29, 2017
Once again 1A Auto parts were excellent, rapid delivery, and reasonable price.
October 13, 2017
So far, so good!
Just installed this on my Honda Accord 2001 EX last week because the old one has leak problems. The instruction video was extremely helpful and easy to follow! Great pricing and fast shipping. I cant ask for more.
January 27, 2018
It arrive on time I installed about two days after I got it and it is working good so far so good Im glad I took a chance on it its still to soon to say to much but time will tell
March 21, 2018
Great fast service..I would buy more from you guys
July 12, 2018
Works perfect, car runs noticeably smoother!
Part fits perfectly, it only took 15 minutes to install. My Accord fires up noticeably quicker and runs smoother. Once again a great quality part from 1A Auto!
November 5, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this part include gaskets for it?- Thanks
Edgar R August 28, 2015
This part does comes with the gaskets
Shaleta C August 28, 2015
I Believe it had everything needed for installation It was quite a while back when I did that job I will add though it did not fix the whole problem We had to replace the alternator also There is a bulletin about that somewhere I hope this helps Good luck
James R August 28, 2015
Yes. Comes complete. Just install.
Archie A August 28, 2015
No gaskets need it. The new distributor has new gaskets with it. It comes ready to replaced the old one.
Luis G August 28, 2015
Its the complete assembly...bolts on metal to metal. If I recall correctly. In short, everything needed was supplied and work beautifully. If you watch the video...everything worked exactly depicted...from part to installation.
Christopher C August 28, 2015
Yes it included cap gasket and o-ring.
Randy C August 28, 2015
ya man, its pretty much plug and play, i hope this works for you.
Eric N August 28, 2015
Yes , and its easy to install, there is a instructional video .
Rizalino M August 28, 2015
No gasket is needed for this part. However, there is a rubber seal that is built into the piece that connects to the shaft.
Barrie J M August 30, 2015
Yes. It came with everything that was needed to replace the distributor.
Paul M September 1, 2015
I have an accord. The distributor doesnt use gaskets. It bolts directly onto block. The o-ring on the distributor is what seals it when mounted.
Scott H September 1, 2015
Year Make Model Description
1998-1999Acura CL Acura CL Distributor L4 2.3L
1998-2002Honda Accord Honda Accord EX Distributor L4 2.3L
1998-2002Honda Accord Honda Accord LX Distributor L4 2.3L
1998-2002Honda Accord Honda Accord SE Distributor L4 2.3L
Part #: 1AEDI00021

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:30 min)