Replaces

Acura CL Honda Accord Brake Rotor Nakamoto 3287, 42510-SV4-A00 - 1ABFS01417

Specifications:

  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Fit 4 Lug Wheels
  • Direct replacements
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 4 Lug
  • Front Brake Rotor Specifications: 10.24" (260mm)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Remove center cap
    • While your car is still on the ground, use your 21mm socket to loosen your lug nuts
    • Jack up and secure your car with jack stands
    • Remove the lug nuts with your 21mm socket and ratchet
    • Remove the wheel and set aside
  2. step : Removing the Calipers (1:30)
    • Remove the 14mm bolts to remove the calipers
    • Use a wire tie to fasten the caliper out of the way
    • Use your 17mm socket and ratchet to remove your caliper brackets
    • Pop out your brake pads
  3. step : Install New Pads (4:07)
    • Check your caliper pins to make sure they are in good working order
    • Put your caliper bracket back on, and tighten the 17mm bolts to 70 ft lbs
    • Insert your new pads into the brackets
    • Use your C-clamp or caliper tool to compress your caliper
    • Place your caliper onto the bracket
    • Tighten your 14mm bolts
  4. step : Replacing the Wheel (7:25)
    • Make sure to use a star pattern when putting your wheel lugs back on
    • Tighten to 75-85 ft lbs
    • Replace center cap
  5. step : Testing the Brakes (8:20)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place
    • Test the brakes in your driveway before taking the car onto the road

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997 Acura CL Front & Rear Brake Rotor 4 Piece Set L4 2.2L Nakamoto
  • 1991-1994 Honda Accord Front & Rear Brake Rotor 4 Piece Set (excluding Wagon) Nakamoto
  • 1995-1997 Honda Accord Front & Rear Brake Rotor 4 Piece Set L4 2.2L (excluding Wagon) Nakamoto

This part replaces:

  • Nakamoto 3287, 42510-SV4-A00
Part #: 1ABFS01417

Nakamoto
Brand #: 3287, 42510-SV4-A00

How-to Video:

(09:04 min)