Replaces

Acura CL Honda Accord Brake Kit Nakamoto CD537, CD465A, 3287, 42510-SV4-A00 - 1ABFS01599

This brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi CERAMIC ENHANCED Disc Brake Pads
  • 8 Piece FRONT & REAR Brake Pad Set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Replaces dealer part numbers: 42510-SV4, 45251-SM4-000, 45251-SM4-010, 45251-SM4-020, 42510-SM4-950, 42510-SV4-A00, 42510SV4, 45251SM4000, 45251SM4010, 45251SM4020, 42510SM4950, 42510SV4A00
  • Fit 4 Lug Wheels
  • Direct replacements

This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Remove center cap
    • While your car is still on the ground, use your 21mm socket to loosen your lug nuts
    • Jack up and secure your car with jack stands
    • Remove the lug nuts with your 21mm socket and ratchet
    • Remove the wheel and set aside
  2. step : Removing the Calipers (1:30)
    • Remove the 14mm bolts to remove the calipers
    • Use a wire tie to fasten the caliper out of the way
    • Use your 17mm socket and ratchet to remove your caliper brackets
    • Pop out your brake pads
  3. step : Install New Pads (4:07)
    • Check your caliper pins to make sure they are in good working order
    • Put your caliper bracket back on, and tighten the 17mm bolts to 70 ft lbs
    • Insert your new pads into the brackets
    • Use your C-clamp or caliper tool to compress your caliper
    • Place your caliper onto the bracket
    • Tighten your 14mm bolts
  4. step : Replacing the Wheel (7:25)
    • Make sure to use a star pattern when putting your wheel lugs back on
    • Tighten to 75-85 ft lbs
    • Replace center cap
  5. step : Testing the Brakes (8:20)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place
    • Test the brakes in your driveway before taking the car onto the road

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 21mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Don't hesitate.
The parts I ordered are good quality parts . Fit great. I ordered a lot of different things and everyone was on the money. I will be back. Thanks
September 13, 2017
Purchased
8 months ago
Great Product but Wrong items
I recently purchased this product and waited to give my feedback until I had the brakes and rotors installed. Everything was shipped in a timely fashion and when I went to my mechanic to have it installed he told me I was given the wrong back brakes. This kit gives disc brakes and my 1994 Accord uses drum rear brakes. Everything is ok tho because I was sent a refund and they prorated me for the cost. Customer service was amazing, I just wish they fixed this issue and offer the proper products in the kit.
August 28, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
Does this kit work for a 94 Accord Wagon?
Jess K on Nov 9, 2017
BEST ANSWER: These are not made for the 1994 Accord Wagon. Please view our other listings for the appropriate parts.

Vehicle Fit

  • 1997 Acura CL L4 2.2L Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 1993-1994 Honda Accord Coupe Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 1994 Honda Accord Sedan Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 1995-1997 Honda Accord (excluding Wagon) L4 2.2L Front & Rear Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD537, CD465A, 3287, 42510-SV4-A00
Part #: 1ABFS01599


Nakamoto
Brand #: CD537, CD465A, 3287, 42510-SV4-A00

How-to Video:

(09:04 min)