This replacement ABS (Anti-Lock Brake) Sensor with harness is just what you need to get your vehicle's ABS system in good operating condition again!

A bad, corroded, frayed, or malfunctioning ABS sensor can cause an ABS light to illuminate on your instrument panel, and store an ABS diagnostic error code. If your ABS sensor or wiring harness is corroded or damaged it will prevent your ABS sensor, and ABS system from working properly.

Specifications:

  • Fits LH (Driver Side) or RH (Passenger Side) FRONT WHEEL
  • Includes Harness with Plug
  • Correct connectors and wire length
  • Built to strict quality control standards
  • Replaces dealer part numbers: 15112402, 15225723
  • Direct replacement
  • 100% electrically factory tested
  • Plugs into existing body mounted ABS harness
    • No Splicing needed
  • Fits both 2WD & 4WD models as listed per application

Note: For 2007 models, this fits the old body style or Classic style truck. The Classic style truck has a crease that runs down the center of the door skin. New body styles have a smooth door skin

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:15)
    • Use a 21 mm socket to remove the plastic covers and loosen the lug nuts.
    • Raise and secure the wheel and remove the lug nuts.
  2. step : Remove the brakes (1:42)
    • Unbolt the two bolts with your 18 mm socket and ratchet.
    • Use a breaker bar if necessary.
    • With a large screwdriver, pry the caliper apart and off.
    • Unbolt the caliper bracket with a 21 socket.
    • Pull off the brake rotor.
    • Secure the brake caliper out of the way.
  3. step : Remove the ABS sensor (3:50)
    • Use an Allen wrench and a pair of pliers to unbolt the ABS sensor.
    • With an adjustable wrench, disconnect the ABS sensor cable from the strut.
    • Disconnect the wiring harness and the ABS sensor.
  4. step : Install the new ABS sensor (6:40)
    • Plug the ABS sensor into the wiring harness and anchor the cable back down using an adjustable wrench.
    • Bolt down the ABS sensor to the hub.
  5. step : Reinstall the brakes (8:50)
    • Mount the brake rotors.
    • Put the caliper brackets back on and bolt down with a 21 mm socket.
    • Torque the caliper brackets to 110 ft lbs
    • Using a large flat blade screwdriver to pry open the caliper enough to get it mounted onto the caliper bracket.
    • Torque the 18 mm caliper bolts to 85 ft lbs.
  6. step : Put the wheel back on (9:50)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle
    • Use a star pattern to torque the lug nuts to 120 ft lbs.

Tools needed for replacement:

    Allen Wrenches

  • 8mm Allen Wrench

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers
  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 18mm Socket
  • 22mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Works like it should
My front driver's side ABS would kick in at very low speeds. On two different occasions, my ABS light and warning chimes went off. I replaced the speed sensor with this one from 1A Auto, and the ABS system works just as it should. No more low speed ABS engagement. The fit was perfect, and installation was easy. The other, poor reviews most likely have other issues going on.
October 9, 2017
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Chevy Avalanche 2500 ABS Speed Sensor with Harness Front
  • 2001-2003 Chevy Silverado 1500 HD ABS Speed Sensor with Harness Front
  • 2005-2006 Chevy Silverado 1500 HD ABS Speed Sensor with Harness Front
  • 2007 Chevy Silverado 1500 HD Classic ABS Speed Sensor with Harness Front
  • 1999-2004 Chevy Silverado 2500 ABS Speed Sensor with Harness Front
  • 2001-2006 Chevy Silverado 2500 HD ABS Speed Sensor with Harness Front
  • 2007 Chevy Silverado 2500 HD Classic Front ABS Speed Sensor with Harness
  • 2004-2006 Chevy Silverado 3500 ABS Speed Sensor with Harness Front
  • 2007 Chevy Silverado 3500 Classic Front ABS Speed Sensor with Harness
  • 2000-2005 Chevy Suburban 2500 ABS Speed Sensor with Harness Front
  • 2001-2003 GMC Sierra 1500 HD ABS Speed Sensor with Harness Front
  • 2005-2006 GMC Sierra 1500 HD ABS Speed Sensor with Harness Front
  • 2007 GMC Sierra 1500 HD Classic ABS Speed Sensor with Harness Front
  • 1999-2004 GMC Sierra 2500 ABS Speed Sensor with Harness Front
  • 2001-2006 GMC Sierra 2500 HD ABS Speed Sensor with Harness Front
  • 2007 GMC Sierra 2500 HD Classic Front ABS Speed Sensor with Harness
  • 2004-2006 GMC Sierra 3500 ABS Speed Sensor with Harness Front
  • 2007 GMC Sierra 3500 Classic Front ABS Speed Sensor with Harness
  • 2000-2006 GMC Yukon XL 2500 ABS Speed Sensor with Harness Front
  • 2003-2005 Hummer H2 ABS Speed Sensor with Harness Front

This part replaces:

  • OE # 15112402
  • OE # 15225723
  • Dorman 970-060
  • Standard Motor Products ALS483
Part #: 1AZWH00047

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(11:00 min)