Specifications:

  • Fits LH (Driver Side) or RH (Passenger Side) Front
  • Includes ABS Sensor & Harness
  • Built to strict quality control standards
  • Direct replacement

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:44)
    • Pry off the center cap with a flat blade screwdriver
    • Remove the wheel lock with the wheel lock key
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Backing Plate (1:46)
    • Remove the two 15mm bolts from the brake caliper bracket
    • Hang the caliper aside with a bungee cord
    • Pull off the brake rotor
    • Remove the three 8mm bolts from the backing plate
  3. step : Removing the ABS Sensor (2:38)
    • Remove the 5mm Allen bolt from the ABS sensor
    • Pull the sensor out of the hub with pliers
    • Disconnect the abs sensor wiring harness
    • Remove the 8mm bolt from the sensor harness
    • Pull off the ABS sensor
  4. step : Installing the ABS Sensor (3:58)
    • Put the ABS harness into place
    • Fasten the ABS harness to the spindle with the 8mm bolt
    • Connect the ABS wiring harness
    • Insert the ABS sensor into the hub
    • Fasten the 5mm Allen bolt for the ABS sensor
  5. step : Installing the Backing Plate (4:49)
    • Put the backing plate into place
    • Install the three 8mm bolts for the backing plate
    • Put the rotor into place
    • Put an old axle nut on one wheel stud
    • Thread a lug nut onto that wheel stud by hand to hold the rotor in place
    • Remove the bungee cord from the caliper
    • Put the caliper into place
    • Start the two 15mm bolts for the caliper bracket
    • Tighten the two 15mm bolts to 85 foot-pounds of torque
    • Remove the placeholder lug not and axle nut
  6. step : Installing the Wheel (5:57)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 15mm Socket
  • 8mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1996-2001Ford Explorer Ford Explorer 4 Wheel Drive Front ABS Sensor Driver or Passenger Side
2001Ford Explorer Sport Trac Ford Explorer Sport Trac 4 Wheel Drive Front ABS Sensor Driver or Passenger Side
2000Ford Ranger Ford Ranger 4 Wheel Drive Front ABS Sensor (Built After 11/99 Production Date) Driver or Passenger Side
2001-2009Ford Ranger Ford Ranger 4 Wheel Drive Front ABS Sensor Driver or Passenger Side
2000Mazda B2300 Truck Mazda B2300 Truck 4 Wheel Drive Front ABS Sensor (Built After 11/99 Production Date) Driver or Passenger Side
2001-2009Mazda B2300 Truck Mazda B2300 Truck 4 Wheel Drive Front ABS Sensor Driver or Passenger Side
2000Mazda B2500 Truck Mazda B2500 Truck 4 Wheel Drive Front ABS Sensor (Built After 11/99 Production Date) Driver or Passenger Side
2001-2009Mazda B2500 Truck Mazda B2500 Truck 4 Wheel Drive Front ABS Sensor Driver or Passenger Side
2000Mazda B3000 Truck Mazda B3000 Truck 4 Wheel Drive Front ABS Sensor (Built After 11/99 Production Date) Driver or Passenger Side
2001-2009Mazda B3000 Truck Mazda B3000 Truck 4 Wheel Drive Front ABS Sensor Driver or Passenger Side
2000Mazda B4000 Truck Mazda B4000 Truck 4 Wheel Drive Front ABS Sensor (Built After 11/99 Production Date) Driver or Passenger Side
2001-2009Mazda B4000 Truck Mazda B4000 Truck 4 Wheel Drive Front ABS Sensor Driver or Passenger Side
1997-2001Mercury Mountaineer Mercury Mountaineer 4 Wheel Drive Front ABS Sensor Driver or Passenger Side

This part replaces:

  • OE # XL2Z2C204AB
  • Dorman 970-022
  • Standard Motor Products ALS198
Only 4 left in stock
Part #: 1ABES00010


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:42 min)