These replacement ABS (Anti-Lock Brake) Sensors with harnesses are just what you need to get your vehicle's ABS system in good operating condition again!

A bad, corroded, frayed, or malfunctioning ABS sensor can cause an ABS light to illuminate on your instrument panel, and store an ABS diagnostic error code. If your ABS sensor or wiring harness is corroded or damaged it will prevent your ABS sensor, and ABS system from working properly.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT WHEELS
  • Includes Harnesses with Plugs
  • Correct connectors and wire length
  • Built to strict quality control standards
  • Replaces dealer part numbers: 15037208, 15112378, 15112379, 15233108, 15716191
  • Direct replacements
  • 100% electrically factory tested
  • Plugs into existing body mounted ABS harness
    • No Splicing needed
  • Fits both 2WD & 4WD models as listed per applications

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:47)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Caliper Bracket (1:12)
    • Remove the T55 Torx bolts from the caliper
    • Use either a C-clamp to squeeze the caliper to push the caliper piston in
    • Remove the caliper
    • Pry the brake pads off with a flat blade screwdriver
    • Use a piece of pipe and ratchet to remove two 18mm bolts from the caliper bracket
    • Slide the rotor off
  3. step : Removing the ABS Sensor and Harness (2:55)
    • Remove the 5mm Allen bolt with an Allen wrench
    • Pry up on the ABS sensor and pull it free with a flat blade screwdriver
    • Push the tabs on the harness and pull the clips free with a pair of pliers
    • Pull the ABS harness free by prying up on the tab
  4. step : Installing the New ABS Sensor and Harness (4:22)
    • Connect the ABS harness
    • Re-clip the harness and push the clips back into their brackets
    • Apply lubricant to the outside of the sensor
    • Replace the bracket and tighten the 5mm Allen bolt
  5. step : Replacing the Caliper Bracket (5:54)
    • Place the rotor on the hub
    • Twist a lug nut to hold the rotor in place
    • Put the caliper on
    • Replace and tighten the 18mm bolts
    • Torque the 18mm bolts to 75 ft/lbs
    • Install the new brake pads into the bracket, tapping lightly with a hammer
    • Grease the caliper bolts
    • Place the caliper onto the bracket
    • Replace and tighten the T55 Torx bolts
    • Torque the bolts to 30 ft/lbs
  6. step : Reinstalling the Wheel (7:40)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the 22mm bolts
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Reattach the center cap
  7. step : Testing the Brakes (8:13)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Large C-Clamp
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • Ratchet

  • Sockets - Metric

  • 18mm Socket
  • 22mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
0
0
0
0
Nice but sending back.
Although the right parts i found out that i had a bad wheel bearing so I ordered new wheel bearings with abs sensors included. Nice to know that one can get these at that price, because over the counter much more.
January 10, 2018
Purchased
5 months ago
Thank you for expedited my abs cable . In the future I would continue buying from 1aauto
June 23, 2017
Purchased
1 year ago
Perfect Easy peasy fix
This sensor was easy to install thanks to the video that was available and informative
I would recommend 1AAuto to anyone for any automotive fix.
A+ rating in my book.
First place I will look for replacement parts
Robert
February 17, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 6 answers
Will it fit rear 04 Chevy suburban 1500 4x4?
YOLANDA S on May 21, 2018
BEST ANSWER: These items will only fit on the front wheels for your vehicle. Thank you!
Will these fit a 2004 chevy silverado 4wd ?
Rick V on Oct 23, 2017
BEST ANSWER: Yes, these will replace the front ABS sensors on a 2004 Chevy Silverado 1500 4WD and 2WD!
Will these fit 2007 Silverado classic with rear drum brakes?
?
Gordon Y on Sep 24, 2017
BEST ANSWER: Yes, as long as your vehicle is 4WD, and has either a 6400 GVW or 7200LB GVW.
Will this fit the front of a 2006 GMC Sierra 4wd with rear drum brakes? Thanks!
LEIGH F on Aug 5, 2017
BEST ANSWER: No, these will only work on models that have 4-wheel discs, and we do not have them for models with rear drums.
will this fit a 4 WD?
eric g on May 11, 2017
BEST ANSWER: Yes, this will fit models with 4WD or AWD based upon the model.
Hello, Will this product fit a 2005 Chevy Silverado 1500 4WD? I think it would only fit a 2WD, I am not sure though. Thank You
Eric G on May 10, 2017
BEST ANSWER: For this particular model, it is applicable for only the 2WD.

Vehicle Fit

  • 2002-2006 Cadillac Escalade Front ABS Sensor with Harness Pair
  • 2003-2006 Cadillac Escalade ESV Front ABS Sensor with Harness Pair
  • 2002-2006 Cadillac Escalade EXT Front ABS Sensor with Harness Pair
  • 2002-2006 Chevy Avalanche 1500 Front ABS Sensor with Harness Pair
  • 2003-2013 Chevy Express 1500 Van Front ABS Sensor with Harness Pair
  • 2005 Chevy Express 1500 Van 4 Wheel Drive Front ABS Sensor with Harness Pair
  • 2003-2004 Chevy Express 2500 Van ABS Sensor with Harness Front with 7300LB GVW Pair
  • 2005 Chevy Express 2500 Van All Wheel Drive 7300LB GVW Front ABS Sensor with Harness Pair
  • 2003 Chevy Silverado 1500 ABS Sensor with Harness Pair Front (excluding Crew Cab)
  • 2004 Chevy Silverado 1500 Front ABS Sensor with Harness Pair
  • 2005 Chevy Silverado 1500 2 Wheel Drive Crew Cab (excluding 9900LB GVW) Front ABS Sensor with Harness Pair
  • 2005 Chevy Silverado 1500 2 Wheel Drive Extended Cab Front ABS Sensor with Harness without Spring Special Package Pair
  • 2005 Chevy Silverado 1500 2 Wheel Drive Regular Cab ABS Sensor with Harness Pair Front for
  • 2006 Chevy Silverado 1500 4 Wheel Drive Front ABS Sensor with Harness with 6400LB or 7200LB GVW Rear Disc Brakes Pair
  • 2007 Chevy Silverado 1500 Classic 4 Wheel Drive Front ABS Sensor with Harness with 6400LB or 7200LB GVW Rear Disc Brakes Pair
  • 2000-2006 Chevy Suburban 1500 Front ABS Sensor with Harness Pair
  • 2005 Chevy Suburban 1500 2 Wheel Drive (excluding 9900LB GVW) Front ABS Sensor with Harness Pair
  • 2005 Chevy Suburban 1500 2 Wheel Drive ABS Sensor with Harness Pair Front for without Spring Special Package
  • 2007 Chevy Suburban 1500 4 Wheel Drive Front ABS Sensor with Harness with 6400LB or 7200LB GVW Rear Disc Brakes Pair
  • 2000-2006 Chevy Tahoe Front ABS Sensor with Harness Pair
  • 2003-2013 GMC Savana 1500 Van Front ABS Sensor with Harness Pair
  • 2005 GMC Savana 1500 Van 4 Wheel Drive Front ABS Sensor with Harness Pair
  • 2003-2004 GMC Savana 2500 Van ABS Sensor with Harness Front for Models with 7300LB GVW Pair
  • 2005 GMC Savana 2500 Van All Wheel Drive 7300LB GVW Front ABS Sensor with Harness Pair
  • 1999-2000 GMC Sierra 1500 Front ABS Sensor with Harness Pair
  • 2001-2003 GMC Sierra 1500 ABS Sensor with Harness Pair Front (excluding Crew Cab)
  • 2005 GMC Sierra 1500 Crew Cab 2 Wheel Drive (excluding 9900LB GVW) Front ABS Sensor with Harness Pair
  • 2005 GMC Sierra 1500 2 Wheel Drive Regular Cab ABS Sensor with Harness Pair Front for
  • 2005 GMC Sierra 1500 2 Wheel Drive Extended Cab Front ABS Sensor with Harness without Spring Special Package Pair
  • 2006 GMC Sierra 1500 4 Wheel Drive Front ABS Sensor with Harness with 6400LB or 7200LB GVW Rear Disc Brakes Pair
  • 2007 GMC Sierra 1500 Classic 4 Wheel Drive Front ABS Sensor with Harness with 6400LB or 7200LB GVW Rear Disc Brakes Pair
  • 2000-2006 GMC Yukon Front ABS Sensor with Harness Pair
  • 2001-2006 GMC Yukon XL 1500 Front ABS Sensor with Harness Pair
  • 2001-2006 GMC Yukon XL 2500 Front ABS Sensor with Harness Pair

This part replaces:

  • Dorman 970-011 x2
Part #: 1AERK00103

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(08:44 min)