Replaces

ABS Sensor with Harness Front Pair Mopar 4779244AD - MPERK00003

Specifications:

  • Brand New Mopar ABS Sensor Set
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side) Front
  • Original equipment parts
  • Built to strict quality control standards

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:55)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the ABS Sensor (1:22)
    • Remove the 10mm nut from the ABS sensor
    • Pry out the sensor with a pair of pliers
    • Disconnect the harness from its retainers
    • Remove the electrical connector at the front of the wheel well
  3. step : Installing the ABS Sensor (3:20)
    • Reinstall the electrical connector
    • Snap the harness into its retainers
    • Press the sensor into place
    • Tighten the 10mm nut to the sensor
  4. step : Reattaching the Wheel (4:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(04:26 min)

Tools List:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 10mm Socket



This part replaces:

  • Mopar 4779244AD
  • OE # 4779244AD

Vehicle Fit

  • 2005-2006 Chrysler 300 Front ABS Sensor with Harness Pair for Models with Rear Wheel Drive Mopar 4779244AD
  • 2007-2010 Chrysler 300 Front ABS Sensor with Harness Pair Mopar 4779244AD
  • 2008-2010 Dodge Challenger Front ABS Sensor with Harness Pair Mopar 4779244AD
  • 2006-2010 Dodge Charger Front ABS Sensor with Harness Pair Mopar 4779244AD
  • 2005-2008 Dodge Magnum Front ABS Sensor with Harness Pair for Models with Rear Wheel Drive Mopar 4779244AD
Only 1 left in stock
Part #: MPERK00003

Ships Same Day for orders placed by 4 P.M. ET

Brand #: 4779244AD

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More