Replaces

ABS Sensor with Harness Front Mopar 4779244AD - MPBES00003

Specifications:

  • Brand New Mopar ABS Sensor 
  • Fits Either LH (Driver Side) or RH (Passenger Side) Front
  • Original equipment part
  • Built to strict quality control standards

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

OEM Part

Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.

Part Details

  • Front or Rear Location: Front

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:55)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the ABS Sensor (1:22)
    • Remove the 10mm nut from the ABS sensor
    • Pry out the sensor with a pair of pliers
    • Disconnect the harness from its retainers
    • Remove the electrical connector at the front of the wheel well
  3. step : Installing the ABS Sensor (3:20)
    • Reinstall the electrical connector
    • Snap the harness into its retainers
    • Press the sensor into place
    • Tighten the 10mm nut to the sensor
  4. step : Reattaching the Wheel (4:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2006 Chrysler 300 Front ABS Sensor with Harness for Models with Rear Wheel Drive Mopar 4779244AD
  • 2007-2010 Chrysler 300 Front ABS Sensor with Harness Driver or Passenger Side Mopar 4779244AD
  • 2008-2010 Dodge Challenger Front ABS Sensor with Harness Driver or Passenger Side Mopar 4779244AD
  • 2006-2010 Dodge Charger Front ABS Sensor with Harness Driver or Passenger Side Mopar 4779244AD
  • 2005-2008 Dodge Magnum Front ABS Sensor with Harness for Models with Rear Wheel Drive Mopar 4779244AD

This part replaces:

  • Mopar 4779244AD
  • OE # 4779244AD
Part #: MPBES00003

Out of Stock

Brand #: 4779244AD

How-to Video:

(04:26 min)