Our aftermarket cooling fan assemblies are some of the highest quality replacements on the market! This Toyota AC Condenser cooling fan assembly is a complete, ready to bolt on, direct replacement part.


  • RH (Passenger Side)
  • New, not rebuilt, electric motor(s)
  • Geometrically designed plastic blade(s) for optimal circulation and uniform balance
  • Shroud designed to ensure structural integrity and endurance for maximum performance
  • 100% Performance factory tested
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug(s) for trouble free installation
  • Built to strict quality control standards
  • Direct bolt on

We have noticed that there are many inferior quality fan motors on the market. We have researched other fan motor manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket fan motors available. So don't be fooled by cheaper made imitation cooling fan assemblies. Go with superior quality!

Now you can buy a high quality Toyota AC Condenser cooling fan motor assembly that is built to strict quality control standards. This cooling motor assembly makes a great replacement and has substantial cost savings over a dealer fan assembly.


Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed


Part Details

  • Fan Blade Count: 7 Blade Fan

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Radiator Cooling Fan (0:46)
    • Disconnect the electrical connector
    • Remove the two 10mm bolts from the cooling fan
    • Lift the cooling fan up and out
  2. step : Preparing the New Radiator Cooling Fan (2:30)
    • Remove the two 10mm bolts from the motor plate
    • Slide the clips off of the fan
    • Push the connector's clips together with pliers
    • Push the connector out
    • Push the retainer off of the connector with a flat blade screwdriver
    • Slide the retainer on to the new connector
    • Press the connector into the fan
    • Slide on the clips
    • Tighten the motor plate onto the fan assembly
  3. step : Installing the Radiator Cooling Fan (4:08)
    • Insert the fan shroud into the pin retainers
    • Tighten the two 10mm bolts to the cooling fan
    • Connect the electrical connector

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2001 Lexus ES300 A/C Condenser Cooling Fan Assembly for Models with 7 Blade Fan Passenger Side
  • 1997-2001 Toyota Camry A/C Condenser Cooling Fan Assembly V6 3.0L with 7 Blade Fan Passenger Side
  • 1999-2003 Toyota Solara A/C Condenser Cooling Fan Assembly V6 3.0L with 7 Blade Fan Passenger Side

This part replaces:

  • Partslink TO3113111
  • Hollander 674-58819
  • Dorman 621-145
  • TYC 610270
  • DEPO 312-55013-201
Only 1 left in stock
Part #: 1AACF00036

How-to Video:

(04:59 min)