Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Product Features
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Tools used
First thing you're gonna do is disconnect the spark plug wire from the spark plug. Just grab ahold of it. Give it a twist, and pull it. Disconnect from the coil the same way, twist, and pull. You're gonna keep this heat shield. Just pull it. Set it aside. Two mounting bolts mount the actual coil to the bracket. You have one connector. So, you're gonna take that tab. Lift that tab out. Pull the connector out. 10 millimeter socket. Lift the coil out.
So, to reinstall, just reverse procedure. Line up the bolts. Torque the two mounting bolts to 89 inch-pounds. Double-check. Now, you're gonna reinstall the connector. Line it up. Push it down until you hear it click. Tab's locked. Twist on the new coil wire, spark plug wire, it comes pre-siliconed. Slide your old heat shield over it right to the bottom. I like to put it right on the spark plug until it clicks in. Hear it? And line up the angle to the coil. Now, just repeat the procedure to the other seven cylinders.
