Part Details

  • Light Option: Halogen

 

Fit guaranteed

  • This headlamp will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.

Quality

  • 1A Auto has the most comprehensive warranty.
  • If this headlight should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.

Value

  • Replacing a discolored, scratched, dull or damaged headlight with a headlight from 1A Auto can increase your resale value by up to 10%.

Safety

  • A new headlight can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new headlight from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather..
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Removing the Grille (0:21)
    • Open the hood
    • Remove the four 10mm bolts from the top of the bulb
    • Pry the two push clips out from the top of the grille with a flat blade screwdriver
    • Pull the grille up off its grommets
    • Release the tabs at the bottom of the grille
    • Lift the grille up and off the truck
  2. step : Removing the Bumper Cover (2:44)
    • Remove the two 10mm bolts from the back of the bumper cover inside the fender liner
    • Pry the two push clips out of the bumper cover with a flat blade screwdriver
    • Pull the bumper cover off the truck
  3. step : Removing the Headlight (3:42)
    • Remove the two 10mm bolts from the top of the headlight
    • Remove the 10mm bolt from the side of the headlight
    • Cover the bumper with a rag to protect the headlight lens
    • Pull the headlight up, forward, and off
    • Pull the sockets off the headlight bulbs
    • Disconnect the electrical connector from the height adjustment
    • Unclip the wiring harness from the headlight
  4. step : Installing the Headlight (6:14)
    • Connect the sockets to the headlight bulbs
    • Connect the electrical connector to the height adjustment
    • Clip the wiring harness to the headlight
    • Line up the headlight with the metal tab on the bumper
    • Push in the headlight
    • Lower the headlight onto its grommets
    • Insert the 10mm bolt into the side of the headlight
    • Insert the two self-tapping 10mm bolts into the top of the headlight
  5. step : Installing the Bumper Cover (8:02)
    • Remove the rag from the bumper
    • Press the bumper cover into place
    • Push the two plastic clips into the bumper cover
    • Insert the two 10mm bolts in the back of the bumper cover inside the fender liner
  6. step : Installing the Grille (8:40)
    • Line up the grille with the bumper
    • Push the grille clips into the bumper
    • Push the grille onto its grommets
    • Push the two plastic clips into the top of the grille
    • Insert the four 10mm bolts into the top of the grille

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2014-2017Toyota Tundra Toyota Tundra Halogen Headlight Driver Side for Models with LED Running Lights & Automatic Leveling Headlights

This part replaces:

  • Hollander 114-60371L
  • TYC 20-9500-00-1
  • DEPO 312-11D8LMASMN
  • Partslink TO2502220
  • OE # 811500C100
  • OE # 811500C101
Part #: 1ALHL02593

Out of Stock

How-to Video:

(10:06 min)