Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Premium Electrostatic Coated Brake Rotor Features and Benefits:

  • Electrostatically applied finish on both sides of the rotor hat and rotor edge for long lasting corrosion protection.
  • Uniform coating without any overspray.
  • Enhanced appearance.
  • Designed to withstand 400 hours of saltwater exposure without rusting.
  • Mill balanced and double-disc ground friction surface provides smooth braking and longer pad life.
  • Positive Mold Technology

    Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

    OE Grade Multi-Layer Shim

    OE Grade Multi-Layer Shim helps reduce vibration and noise

    Environmentally Compliant

    Certified Environmentally Compliant to "Better Brake Law" standards

    Thermal Scorched

    Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

    100% CNC-Machined to Exact OE Specs

    100% CNC-Machined to exact OE specs and balanced to reduce vibration

    Cast from OE Grade Alloy

    Manufactured from OE Grade G3000 Casting Alloy

    Non-Directional Surface Finish

    Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

    Lifetime Warranty

    This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

    Wear and Tear

    This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

    1. step : Remove the wheel (0:52)
      • Loosen your lug nuts with a 19 mm socket and breaker bar
      • Raise and secure the vehicle.
      • Remove the lug nuts the rest of the way and set the wheel aside.
    2. step : Inspect and remove the brakes (1:07)
      • Observe the thickness of your brake pads.
      • Inspect your rotors for excessive wear or deep gouges.
      • Loosen the caliper bolt with a 14 mm socket and ratchet.
      • Use a flat blade screwdriver to compress the caliper pistons some and remove the caliper.
      • Unbolt the 19 mm caliper bracket bolts.
      • Remove the rotor and pop the plug out of the rotor.
    3. step : Install the new disc brakes (2:07)
      • Hit the emergency brake with brake cleaner.
      • Clean your new rotor with brake cleaner (mineral spirits would work just as well)
      • Install the brake rotor onto the vehicle and replace the little access plug.
      • Mount the caliper bracket and torque the 19 mm bolts to 85-90 ft lbs
      • Use a C-clamp to compress the caliper.
      • Install the brake pads, dabbing a bit of anti-seize grease on the edges to get it in.
      • Push the caliper into place and bolt it down with your 14 mm socket.
      • Torque the 14 mm bolt to 25 ft lbs.
    4. step : Mount the wheel (4:39)
      • Put the wheel on the vehicle.
      • Hand-tighten the lug nuts.
      • Lower the vehicle.
      • Torque your lug nuts in a star pattern to 100 ft lbs.

    Tools needed for replacement:

      General Tools

    • Floor Jack
    • Jack Stands

    • Materials, Fluids, and Supplies

    • Anti-Seize Grease
    • Brake Parts Cleaner

    • Ratchets & Related

    • 1/2 Inch Breaker Bar
    • A Piece of Pipe (for leverage)
    • Ratchet
    • Torque Wrench

    • Sockets - Metric

    • 12mm Socket
    • 14mm Socket
    • 19mm Socket
    • 21mm Socket
    • 8mm Socket

    There are no reviews for this item. Write Review
    Start typing your question and we'll check if it was already asked and answered. Learn More
    No questions have been asked about this item. Be the first!

    Vehicle Fit

    • 2014-2017 Nissan Rogue Front & Rear Premium Posi Ceramic Brake Kit
    Part #: 1ABFS03300

    Out of Stock

    How-to Video:

    (05:32 min)