Ram 1500 1500 Classic 2500 3500 Driver & Passenger Side 2 Piece Mirror Set Trail Ridge TR00041

Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!

We'll open up the door. And we are going to start off by coming up here and removing this cover. You can just put your hands behind it, kind of pull up. And you can see there's a push pin here, and a push pin here, and then there's two little hooks that hook into the door panel itself. Around the perimeter of the door panel are six T-20 torx bolts, and they're actually made of plastic, which is a little strange. We'll go all around the door panel, and we'll start pulling these out. Being that they're plastic, they don't come out like a normal screw does. You have to be very gentle, and almost pull on them as they unscrew. Here we go.

Right here, behind the door panel, is a secret cover that you can pop off with a flat-tip screw driver. And you can see, you want to grab it from the top, and go down, and then behind that is a Phillips head screw. So now, we'll use a Phillips head screwdriver to remove the Phillips head screw. For the power window switch, we'll just slide a little screw driver in here. It pops out super easy. And we'll pop up this little safety pin. Here we go. And then you can push the tab down and pull the connector out.

These little anchors here, they need to come out of the door panel because we need to lift it up. We just lost one. Now we'll do the upper one, and there's the second one. So we'll go all the way around the door, and pop those out. And then all we have to do is lift straight up on the door panel, and it should come off.

All right. Now, we're going to use a pair of needle nose pliers to sneak in behind this clip and squeeze it, so that it can come out. All right, now we'll use the trim clip removal tool to pop that out, although you could probably just pull it with your hand, judging by the looks of it. Then we're going to disconnect the connectors, which you can simply pull. You can see there's a little push pin, or a push tab that you push down, and then you can pull out, and it will be the same on both of them, like so.

Now on the mirror, you're going to find three 10 millimeter nuts that we're going to want to pull off, so I've got my 10 millimeter socket and an extension, just because I love extensions, and a 1/4 drive ratchet. Once you crack them loose, you'll be able to just spin them off by hand. This one is actually behind this rubber piece, so I think what we're going to do is maybe do that one last, and it will just stay there. Make sure you support the mirror on the other side, so that it doesn't fall off the truck.

It looks like this mirror actually has a clip on the top, which is pretty nice because that sort of holds it in place, and helps you so it doesn't fall off the truck when you take the three nuts off.

Now we're going to feed these wires through this hole and pull it through. Make sure the bolt holes line up. Then you can snap in the top clip and start threading the three 10 millimeter nuts on. Now we'll tighten these up. You don't want to go too crazy with these because it's easy to snap the studs right off the mirror, so you just want to use your wrist really, to tighten these things up.

Now we're going to do this in the reverse order by plugging them in the right way. Nope, I guess it's right here. There we go. The black one goes on top, and we'll plug this in the door panel, and then right up here, we have that last clip.

To put the back panel back on, we're going to slide this lock, up through the hole, and then we're going to feed the power window of wires per window, switch wires, through this, and then kind of drop it down onto the door panel. Now we'll plug in the window switch and drop it right into the door panel.

We're now going to slide the door handle bezel, behind, doing the rear section first, and then snapping it into place. And then there's a large Phillips head screw that we'll slide right through here and screw in. And then there's the little access panel that will also slide in, doing the bottom first. And that also just snaps right in. We're now at the point where we can put these door panel screws back in. They go in just like this. Looks like I'm probably going to have to hold the bottom piece to get the screw in. And we'll do this, all the way around the door. And lastly, we'll put this right back on to cover up the mirror bolts.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.

Okay, friends, let's get started on these mirrors. The first thing we're gonna do is start taking off the door panel. I'm gonna start right up along the top, you can either use your hands, but if you're not strong enough, I would use something plastic and come right in between here and pop this off. Now, you can see the mounting bolts for the mirror. There's one here, here and here, but we're not gonna touch those yet because there's still some wiring we need to get to. Right behind this handle there's a little secret door, we're gonna get to that with a small pocket screwdriver. Behind that, you're gonna see that there's a Phillips head screw. There it is. Next thing I'm gonna do is I'm gonna come right along here and just try to pull this up. I'm gonna use my pocket screwdriver, but you could also use something plastic if you're super worried about it. I just want something thin. I'm gonna lift right up and disconnect this. There's a little squeeze tab, pull it off, check your connection.

The next thing I'm gonna do is I'm gonna move along to here. You can see that there's little mounting screws, but they're not actually screws. What they are is they have little Torx heads, but they're kind of like pushpins. So, what I like to do is take this small pocket screwdriver, and I just try to grab the edge of it. There's two parts to this and I'll show you. The center part, and then you have the outer part. There it is. Okay? So, when it was together, it looked like that. I separated the two by grabbing with a pocket screwdriver, pulled out the center and then the outer portion comes out as well. I'm gonna do the same to all of them. The next thing I'm gonna do is lift up on the door panel, should wanna come right up. And then carefully pull this out, just like that. Lift up right up along here, that off of there, and remove the door panel.

Now that we have a clear view of everything on the inside, you can follow your wire, it comes right down along here, and it's the black and white. To release those, you just grabbed this little piton, and you draw it out. Do the same thing here. Now they're held in by push clips here, you got little squeezy tabs there, we're gonna pull it out of there, and there's another clip there. You can use a fork tool, pull that right out. You wanna carefully pull this out of that and then this one. Awesome. At this point, all we have left is the three mounting nuts. I'm gonna use the 10-millimeter, I'm gonna loosen the top one. And now I'm just gonna put it back on a few good threads. It's still loose, but it's gonna hold that on. So, now I came around to the outside, I'm just gonna grab this mirror, I'm gonna wiggle it around. There's nothing else holding it so I'll grab that last nut while holding on to the mirror so I can't fall. At this point, what's holding it in is just a little push clip that holds the mirror into the door. Just give it a little tug, and it pops right off. There's the clip. Now I'm gonna draw this out of here, and there we go, friends.

So, I've got my new mirror here. The first thing I'm gonna do is grab my wiring, and I'm going to put it through that hole where the wiring goes. Bring this right up, and I've still got that last nut that I took off the old mirror. I'm gonna line this up with its holes just like so. Should wanna line up with that little push clip too and just press it in. Put that nut on as many good threads as you can so you know what's holding the mirror secure. We've got our wiring, make sure it's not pinched. Gonna grab my little screwdriver, and I'm just gonna try to grab some of this foam here. This is just protective foam. I wanna try to bring it down and make sure that this wire can't get caught on anything, looks like it's about as far as it wants to go. Grab my other two mounting nuts. We know that this clip goes right here. We'll go ahead and do that now. We know we have plenty of slack and there's nothing stuck up inside here. This wiring is definitely out far enough. At this point, I'm gonna snug these up.

It's super important to make sure that these are tight. The last thing you want is your mirror to be wobbling around while you're driving down the road. If you wanted to, you could use a little bit of threadlocker but I would use blue. Just gonna snug it. There it is. Okay, it's bottomed out, teeny bit more. Bottomed out, teeny bit more. Give that mirror a nice wiggle. I see no movement here. All right, so let's move along. We've got our black and our white, the black goes up top and then next the white. Awesome. You don't wanna leave this hanging like this though, okay? I'm just gonna pull this down and put it right through this little thing. If for some reason the wires don't wanna go you could try to flatten them out. If they're bunched up in a circle it's just not gonna fit through there. Then if it still doesn't wanna go through there, what I would do is I would use my pocket screwdriver, put it in, kind of give it like a little leverage and that'll help it go right in. Perfect. Yeah, this looks great. Awesome.

Okay, let's test this. Test this side to side, up and down. That's perfect. Let's get the door panel back on. Okay, so let's get started on installing this door panel. The first thing that I'm gonna do is take out this, it's just a little piece of rubber, I'm gonna set it aside for now. I'll turn this around because I wanna show you something. You can see these hooks, they come all the way around the door panel. Those need to go on these, okay? They're all over the place on the inside here. Another thing that we wanna pay attention to do is you have your door handle here, that's gonna have to go through this hole. And then you also have your wiring, that's gonna come through this hole right here. Here we go. Let's start right there. Gonna grab that handle, I'm gonna grab the wire. Okay, I've got everything that I need here. Now I'm just gonna press in on the door panel, press it towards the rest of the door. And then here's the hard part, just lining all those little hooks up.

Once you think you have the door panel completely on all the hooks, just feel around the whole sides. As you do that, pay attention to the holes, make sure the door panel's completely up against the door and all those holes are lined up. This one looks great. Let's grab some of those push tabs that go around the outer portion of this door panel. The first thing that I wanna do is grab all the outer portions. That's the part that presses in through the door panel and into the actual door itself. You go just like that, grab that inner portion looks kind of like a screw. You don't have to worry about screwing it in though, you just press it. We're going to do the same all the way around the door panel. The next thing I'm gonna do is grab my anchor screw. This is the main anchor screw for the whole door panel so you can't forget it. Comes right behind here, just start that right in, snug it up. Once it's bottomed out, just give it a teeny bit more but you don't need to go too much further than that. I'm gonna grab this little panel here. Just make sure it's completely pressed in, and that feels great. Let's move along to this switch. Just gonna line it up. Press this in, listen for the click, give it a tug. Turn it so it makes the most sense, there we are. Perfect. We'll grab the cover for this. Basically you start with the bottom, it's got little flippy-do that comes out and down and then you press it along the top. That's great. Go ahead and put that right on there. Awesome. I'm gonna check the lock real quick. Perfect. Just grab this last piece of panel here, just presses right on. Give it a couple of loving bonks, that looks great. Before I let you go, don't forget these mirrors do this. Not bad.

Hi, I'm Mike from 1AAuto.com. We've been selling auto parts for over 30 years.

Our Dodge Ram has these standard mirrors on it, these aren't towing mirrors, so we wanna add some 1AAuto upgraded towing mirrors. The ones that we have are direct plug and play. They'll have pull lights just like the original. They'll be heated. And they'll have the power fold option, so the direct plug in. So, for these mirrors to work, you'll have to have these exact options. There's no way to wires them in to upgrade them. I'm just gonna turn the ignition on. We'll see the power fold. And our replacement mirrors that are tow mirrors are gonna work in the same exact way. I will show you how to install those.

We'll use our plastic prying tool, you can get these from 1AAuto.com so you don't damage your plastic trim or the paint work. And you need to pry off this little trim piece that's right at the top here. Just gonna kind of flex it up and then gently pry, pop this out. It comes right out, it has a couple clips. We'll put that aside so we don't lose it.

You can see there's three nuts holding on the mirror, however the harness goes underneath the door where it's plugged in, so the door panel has to come off to get to that harness.

We'll start by taking out the master window switch that also has the mirror controls in it. Again, use the plastic prying tool. Get up underneath it, just pry it up. It comes out pretty easily. Whoops, I hit the lock button.

There's a red plastic lock, you can use a plastic prying tool to pry it up. Unlock it, and then push in on the gray tab. And the connector will come up out.

There's a hidden Phillips head screw behind this little piece of trim, so we need to use the plastic prying tool again and try to sneak it under here. It might be too thick. If the plastic prying tool is too thick, you can use a very small flat bladed screwdriver and carefully pry it in there. And you wanna pry it down, and it will pop out of the clips and then kind of levers down off of where it slides in.

With that trim removed, you can see the Phillips head screw. Just use a Phillips head screwdriver, take it out. And put that aside so I can reuse it.

Around the edge of the door panel, there are six T20 Torx screws. They are plastic Torx screws. They're basically just little clips that screw in there and then spread it out to hold the panel, instead of having traditional clips that you don't see that are behind the panel that would push into the door metal, these have these little screws, you understood then, and then we can pull the door panel off. But just make sure that you get them all out so you don't go ripping them apart. You can use a T20 Torx screwdriver. I'm gonna go along the edge here and take these all out. Once they start to unscrew, they'll probably get to a point where they're loose and you can pull them right out. You're also gonna wanna grab the little grommet that they're in. I'll do that after I remove them all.

We're gonna take one of our trim clip tools, it has the liu cut out in it, and try to pry this out so I can reuse them. Put my finger on it so it doesn't go flying across the shop here. I'll just go along the edge, pull them all out. You can't pull the door panel off without these removed, and you can either break them or they'll go flying everywhere. And here's the last one. Just get this trim tool under here. These can be a bit tricky. Sometimes you go underneath the trim. Whoop, that one flew out.

With all of those out, the door panel should lift straight up and off of the door panel, the steel door panel. Pick it up. It's clips around the door frame, so just lifting it up and off. You can't go too far because the handle is in here. You have to slide it off the handle. And then of course off of the lock part. And then we have our door panels off.

This is our mirror harness. We'll follow it down, and so we can see that it's going into this little junction block of wiring here. So, these two get plugged in right here and here. There's a white and a black connector. I'm gonna use that small flat bladed screwdriver to push the lock in and then pull the white connector out. Do the same for the black connector above it. The harness is clipped to the door panel. I'm gonna try to carefully unclip it by pulling it really close to where it'd clipped. It's kind of like one of those Christmas tree clips. If it doesn't want to come out very easily, you can use a metal trim clip tool and just gently pry on it. It then goes up and clips into the plastic here.

And there's two tabs, they're really hard to see, but we're gonna push them together with some needle nose pliers. Try to reach up in here. Squeeze them together and work that out. So what's happening, is I'm going up in and I'm squeezing these tabs together so that it pulls out from the holder there. Now our harness is disconnected, we'll move onto the mirror.

So, we've got the window down. It's probably best to do this with the window down, the easiest way. There are three 10mm nuts holding the mirror on. I'm gonna use a 10mm socket and a ratchet. I'm using a deep socket. You can probably use a regular socket and extension, but the deep socket lets me get in here without using one. Start by loosening them. I'm not gonna take them all of the way off. I'm also gonna support the mirror with my other hand so it doesn't fall. And let's get this one loose here. It's kind of inside of this rubber weatherstripping, but I'll just finish it off with my fingers. I'm gonna thread it all of the way out and put it aside so I don't lose it. I can thread these off with my fingers now. Put these nuts aside. And we'll feed the harness through the hole and work the mirror off. It does have a clip at the top, so you might have to give it a little bit of a nudge just to break it free. So, that clip holds it to the body while you're tightening the bolt so it doesn't fall, and we'll just feed our harness through the opening. And that is our original mirror.

Here's our original mirror from our truck. It's just black textured plastic, has the turn signal in it, also has the ambient temp sensor. It is power and heated. This is the upgraded towing mirror from 1AAuto.com, it has the ambient temp sensor. This is power folding. It's also heated and when you wanna tow, you can flip this up like that to use it for towing, that part is manual. There is a couple options for these, you can get them in black textured or with the chrome. Since our truck has some chrome accents, we're gonna add the chrome ones in. Additionally, these have a puddle light and the turn signal, so they will operate in the same manner as the original, they're just extended for towing.

It has the same style mounts as the original, and the harness connectors are identical. And these will work as plug and play, and they're ready to bolt on. It'll give you a lot of years of great use.

These will mount in the same way as the originals. We're gonna feed the harness through first. Make sure you have a good hold of these because they are a bit heavier, don't wanna drop them. Get your harness through, I'm gonna push this clip into the opening in the body and at the same time line up the studs. And I'm also gonna hold onto it. And I've got the original nuts in my hand ready to go. Get one caught here. Get the other one caught. And get the last one caught. Take our ratchet, tighten these up. Just kind of go evenly, draw them all in. You don't have to over tighten these because you don't want to pull the studs out of the mirror, they're just metal studs mounted in plastic. So once I feel them get tight, I'm just gonna stop.

We're gonna run our harness in the same way the original one was. Push this clip right into here. Black connector went on the top. And the white connector went in the bottom. And we'll just kind of snug this in here. Just like the original. Now our door panel is ready to go back on.

This procedure is nearly identical for the passenger side. It'll just look a little different because you're working on the passenger side, but same exact way, you'll take the door panel off, replace your mirror, unplug it, plug the new one back in, and you'll be good to go.

To reinstall this door panel, you've got hooks on the inside of it all along it, and they correspond with matching hooks and slots on the inner part of this door panel that's bolted to the metal part of the door. So when you go to put this on, we're gonna want to guide your main wiring harness through for the master window switch. You're gonna have to lift this up, put the door lock in. If the rubber grommet pops out, that's okay. It easily pops back in, because then you're gonna have to maneuver the door handle through the opening here. And kind of wanna lift this up, because the top edge will hook into here. And push that rubber grommet back in. Get this top edge caught.

We'll sort of lift it up, at the same time I'm pushing it toward the door panel. I also wanna line up this edge out here, so this needs to move this way. I need to go up some more. I'm just gently flexing up on the door panel to get into that channel. Pushing against it, and I'm trying to hook it into all of the hooks. There's one there. We'll do the same on this side. All right. That seems to be caught. You can push this rubber grommet down. Okay.

We'll reuse all our plastic push clips. They'll go in here. Go along the edge of the door, install those. Take our T20 Torx and we'll just screw these in. Can't really over tighten them, they'll just keep spinning. What you're doing is when you tighten them, you're spreading out those clips so they lock in place. Just repeat this for all of them. They might just push in on their own, but you can use the Torx bit to install them.

And reinstall the Phillips head screw that came out of here. If you feel it get tight, stop. Put the little panel back in. This slot will lock into the bottom just like that, and then push up and lock in place.

Reinstall the master switch. Find the correct orientation, it'll go in place. Push the red lock down and we'll push it back into the door panel. Reinstall the trim piece at the top here. Driver's side is complete. Just repeat the process for the passenger side. Turn the signal on.

The puddle light, it's right under here. And then for towing, you can flip them up just like that. I'll put them back down. To adjust them, so this part of the mirror, the big part here will be power. And then you'll set the outside one manually to where you want it. They are heated, and they also have power fold.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.