Specifications:

  • Brand New Towing Mirror
  • LH (Driver Side)
  • Power operation glass
  • Heated glass
  • Turn signal
  • Puddle light
  • Flip-up design
    • Patented mirror head design folds out for wider vision
  • Textured black finish injection molded plastic housing

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed, the mirror may not function properly.

Trusted Quality

  • Trail Ridge Truck Accessories are developed and built with a promise to provide high quality, durable parts for your truck and back them with the best warranty in the automotive industry. They are manufactured from the highest quality materials and are constructed to meet or exceed OEM standards. Every Trail Ridge truck part is rigorously tested to ensure superior fit, function, and durability. Quality, trusted value, and hassle-free installation are all backed by our 100% satisfaction guarantee.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:45)
    • Using a flat blade screwdriver pry the screw panel from behind the door handle.
    • Remove the Phillips screw from behind the handle.
    • Pry out the door handle bezel.
    • Pull the triangle panel by the mirror, off.
    • Remove the six T20 clips from the door panel. Twist the center counterclockwise and pull the pin out.
    • Pull carefully around the door panel to release the clips.
    • Lift the door panel up and off.
    • Push under the switch panel and pop it up and out. Disconnect the harnesses.
    • Remove the panel and set it aside.
  2. step : Removing the Mirror (4:01)
    • Disconnect the harnesses that go to the side mirror.
    • Remove the clip.
    • Remove the 10mm nuts securing the mirror.
    • Pull the mirror firmly off.
  3. step : Replacing the Mirror (5:28)
    • Put the mirror in place. Run the harness back through the door.
    • Replace the top nut first and then the other 10mm nut.
    • Plug the harness in.
  4. step : Reinstalling the Door Panel (7:11)
    • Line up the door panel and run the harnesses through the panel.
    • Push it into place.
    • Replace the door handle bezel.
    • Replace the screw and cap.
    • Replace the triangle panel above the door panel.
    • Plug in and press down the switch panel.
    • Replace the T20 screws and pins back into the door.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T20 Torx Driver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Was so easy to order and it was delivered really quickly....we would definitely order again and recommend for people to order from you
March 27, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2012 Ram 1500 Truck Power Heated Turn Signal Puddle Light Manual-Folding Textured Black Flip-Up Towing Mirror Driver Side Trail Ridge
  • 2012 Ram 2500 Truck Power Heated Turn Signal Puddle Light Manual-Folding Textured Black Flip-Up Towing Mirror Driver Side Trail Ridge
  • 2012 Ram 3500 Truck Power Heated Turn Signal Puddle Light Manual-Folding Textured Black Flip-Up Towing Mirror Driver Side Trail Ridge

This part replaces:

  • Partslink CH1320333
  • OE # 68143805AB
  • Trail Ridge TR00121
Part #: 1AMRE02648


Trail Ridge
Brand #: TR00121

How-to Video:

(09:57 min)