Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Mirror Operation:   Power
  • Mirror Color / Finish:   Smooth Black - Paint to Match

This replacement mirror is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits LH (Driver Side)
  • Power operation
  • Folding - Manual operation
  • Paint To Match Finish
    • Can be painted by buyer to match or installed as is
  • Replaces dealer part number: 87909-06400, 8790906400
  • Direct replacement
  • Built to strict quality control standards
  • Fits "L" or "LE" Models as listed by application
    • NOT correct for "SE" or "XLE" Models

This mirror makes a great replacement and has good cost savings over a dealer unit.

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Special Note:

  • Unless otherwise noted, replacement mirrors will only work properly on vehicles with the exact same options. If your vehicle does not have the options listed in specifications, the mirror(s) may not function properly.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing Door Handle (0:32)
    • Remove the Phillips screw
    • Slide handle forward and out.
    • Using a screwdriver pry the clip and push the handle up and off the rod.
  2. step : Removing Door Panel (1:08)
    • Pry the switch panel up and disconnect the lead.
    • Pry up the armrest tab and remove the door trim panel
    • Use a Phillips head to turn the clip and pry it till it pops out.
    • Remove the two screws.
    • Pull the door panel off
  3. step : Removing The Mirror (2:50)
    • Locate the lead and press the button on the back to release it.
    • Remove the three 10 mm nuts
  4. step : Reinstallation of Mirror and Door Panel (4:33)
    • Reinstall in reverse order.
    • Thread 10 mm bolt stops by hand so they are not over tightened
    • Line up door panel clips and push it in, making sure that the lock rod and harness are coming through.
    • Install two Phillips screws in armrest, push armrest into place.
    • Reconnect power window switch and slide the back in first and push the front down into place.
    • Reinstall door handle and push into place.
    • Put the trim panel near window back into place.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2012-2014Toyota Camry Toyota Camry L Power Smooth Black - Paint to Match Mirror Driver Side
2012-2014Toyota Camry Toyota Camry LE Power Smooth Black - Paint to Match Mirror Driver Side
Part #: 1AMRE02501


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:09 min)