This replacement fog light is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits RH (Passenger Side)
    • Bumper Mounted
  • Replaces dealer part number: BC3Z-15200-A, BC3Z15200A
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Built to strict quality control standards

This fog lamp is a great replacement and has good cost savings over a fog light from the dealer.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Fog Light (0:45)
    • Remove the four 13mm bolts from the fender bracket
    • Pull out the fender bracket
    • Remove the three 8mm bolts from the back of the fog light
    • Disconnect the fog light wiring connector
    • Pull the fog light and bezel out from behind the bumper
  2. step : Removing the Fog Light from the Bezel (2:01)
    • Remove the four 13mm nuts that hold the bezel to the fog light
    • Pull the bezel off the front of the fog light
  3. step : Installing the Fog Light from the Bezel (3:12)
    • Slide the fog light bezel onto the fog light
    • Fasten the four 13mm nuts that hold the bezel to the fog light
  4. step : Installing the Fog Light (3:29)
    • Place the fog light into the bumper from behind
    • Install the three 8mm bolts that hold the fog light to the bumper
    • Connect the fog light electrical connector
    • Lift the fender bracket into place
    • Insert the four 13mm bolts into the fender bracket

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 13mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2011-2016Ford F250 Super Duty Truck Ford F250 Super Duty Truck Fog / Driving Light Passenger Side
2011-2016Ford F350 Super Duty Truck Ford F350 Super Duty Truck Fog / Driving Light Passenger Side

This part replaces:

  • Partslink FO2593230
  • Hollander 116-01336R
  • DEPO 330-2037R-AS
  • OE # BC3Z 15200 A
Only 2 left in stock
Part #: 1ALFL00627


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:40 min)