2011-16 Ford F350 Super Duty Truck Wheel Bearing & Hub Assembly Pair TRQ BHA53737 - 1ASHS00821

These replacement wheel bearing & hub assemblies are just what you need to get your vehicle in good working order again.

Specifications:

• Brand New Wheel Bearing & Hub Assemblies
• Comes as a PAIR
  • Both LH (Driver Side) and RH (Passenger Side) FRONT
• 4 Bolt Flanges
• Fit 8 Lug Wheels
• Replaces dealer part numbers: BC3Z-1104-B, BC34-2B513-DA, BC34-2B663-DB, BC3Z1104B, BC342B513DA, BC342B663DB
• Direct replacements
• Built to strict quality control standards
• Fit 4WD (Four Wheel Drive) Models only
• Fit models with DRW (Dual Rear Wheels) only
• Do NOT fit models with Wide Track Axle

What are Tapered Bearings and Why Use Them?

Tapered bearings are better than roller ball bearings at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars. 

Roller ball bearings have spherical ball bearings between two straight rings (called races). Tapered bearings use tapered rollers shaped like flat-topped cones and two races angled from the outside to the inside of the bearing. The greater the angle, the more axial load the bearing can handle.

Your model came from the factory with tapered bearings. This type of bearing handles cornering forces better for trucks and large cars. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing will result in increased wear and faster failure.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.