Specifications:

  • Comes as a Pair
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Factory style add-on upgrade 
  • Clear Lens
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Includes wiring, brackets, bulbs, relay, and switch

Fit guaranteed

  • This fog lamp will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • If this fog light should fail to provide satisfactory performance you may exchange it.
  • 1A Auto fog lights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing a discolored, scratched, dull or damaged fog lamp with a fog light from 1A Auto can help increase your resale value.
Safety
  • A new driving light can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched driving light.
    • 1A Auto fog lights can help you see farther at night and in poor driving conditions.
    • A new fog light from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Fog Light (0:45)
    • Remove the four 13mm bolts from the fender bracket
    • Pull out the fender bracket
    • Remove the three 8mm bolts from the back of the fog light
    • Disconnect the fog light wiring connector
    • Pull the fog light and bezel out from behind the bumper
  2. step : Removing the Fog Light from the Bezel (2:01)
    • Remove the four 13mm nuts that hold the bezel to the fog light
    • Pull the bezel off the front of the fog light
  3. step : Installing the Fog Light from the Bezel (3:12)
    • Slide the fog light bezel onto the fog light
    • Fasten the four 13mm nuts that hold the bezel to the fog light
  4. step : Installing the Fog Light (3:29)
    • Place the fog light into the bumper from behind
    • Install the three 8mm bolts that hold the fog light to the bumper
    • Connect the fog light electrical connector
    • Lift the fender bracket into place
    • Insert the four 13mm bolts into the fender bracket

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 13mm Socket

3.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
0
1
0
0
Adequate
UNits dont fit tight against the bumper like factory, very sloppy. The trim pieces around the lights completely float around, no retainers to hold them still. I would not buy these again.
July 20, 2017
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question
How do I fasten your bezel to your lamp? I purchased your kit and it has no fasteners.
Gary K on Oct 7, 2017

How-to Video:

(04:40 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 13mm Socket




Vehicle Fit

  • 2011-2015 Ford F250 Super Duty Truck Clear Lens Fog Light Kit Upgrade
  • 2011-2015 Ford F350 Super Duty Truck Clear Lens Fog Light Kit Upgrade
  • 2011-2015 Ford F450 Truck Clear Lens Fog Light Kit Upgrade
  • 2011-2015 Ford F550 Truck Clear Lens Fog Light Kit Upgrade
Part #: 1ALFZ00078

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More