Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Outer Tie Rods
  • Quantity: 8 Piece Set
  • Kit Includes: (2) Front Lower Non Adjustable Ball Joints
  • Kit Includes: (2) Front Inner Tie Rods

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Removing the Wheel (0:55)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Front Sway Bar Links (1:24)
    • Remove the upper 19mm nut securing the sway bar link
    • Clamp down the sway bar link with vice grips if needed
    • Repeat the process for the lower end
  3. step : Installing the Front Sway Bar Links (4:02)
    • Insert the bottom of the link into the sway bar
    • Tighten the 22mm nut to the bottom of the link
    • Torque the lower part to 95 foot-pounds
    • Repeat the process for the upper end
  4. step : Reattaching the Wheel (5:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 22mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2011-2014Chrysler 300 Chrysler 300 Rear Wheel Drive 8 Piece Set Steering & Suspension Kit
2011-2014Dodge Challenger Dodge Challenger Rear Wheel Drive 8 Piece Set Steering & Suspension Kit
2011-2014Dodge Charger Dodge Charger Rear Wheel Drive 8 Piece Set Steering & Suspension Kit

This part replaces:

  • Moog ES800986
  • Dorman 537-093
  • Dorman 537-112
  • OE # 68158377AA
  • Dorman 531-175
  • Reference Number K80996
  • OE # 4895483AB, 4872717, 4895483
  • OE # 4895482AB, 4872716, 4895482
  • Moog K80823
  • Moog K80996
  • Moog K80822
  • Moog EV800963
  • OE # 4782740AD, 5290539AB,5290547AB
  • Dorman 536-084
  • OE # 68156902AA
Part #: 1ASFK05678

Out of Stock

How-to Video:

(05:28 min)