2011-12 Ford Explorer Strut & Spring Assembly Pair TRQ SCA57244 - 1ASSP01195

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

4.9 / 5.0
10 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
August 17, 2018
3 weeks ago
Excellent service all around. Website easy to navigate, shipped parts out quick and the quality of the parts was excellent. I will definitely be back for more parts in the future.
April 12, 2018
5 months ago
Firmer ride
The R and R couldn't have been easier...took me 90 minutes on my own, including the clean-up.
The strut assemblies appeared to be identical to the OE units, but the springs were somewhat stiffer, leading to a noticeable difference, especially on rough roads.
The old units had developed the upper mount bearing noise problem, and given that there were 93k miles on the car and I had no desire to screw with compressing the springs to replace the struts and brackets, new assemblies seemed to make the most sense.
I had a 4 wheel alighnment done, and the only correction made was the front and rear toe-in, which should not have been effected by replacing the whole assemblies.
These uits were made in China, but so far they seem to be fine after about 500 miles. I saved my originals in case these don't last....Still a very cost-effective alternative.
March 9, 2018
5 months ago
Ditch the part store!
Quick and easy repair. Shipped to my door within three days. Plus I got the set cheaper than one would've been at my local part store!
February 22, 2018
6 months ago
Did the job no more noise
Shipping was on time and parts are what I ordered.
January 31, 2018
7 months ago
Great transaction!
Parts were correct, cheaper than anywhere else, and arrived earlier than expected! Awesome!
November 17, 2017
9 months ago
Great Product.
The price was right, it fit perfect and so far the quality seems pretty darn good.
July 19, 2017
1 year ago
Perfect Fit Replacement Struts
The replacement struts I received are a great match to the OEM one's I removed from my 2012 Ford Explorer. The quality looks good and the price was very reasonable compared to others I found online or was quoted by several repair shops.
July 5, 2017
1 year ago
Struts for 2011 Ford Explorer!
Very easy to replace!! Two guys, two hours and a few cold ones. Would have done it quicker but needed a few different sizes of wrenches and sockets. Then for good measure got it aligned and she runs perfect!! delivered again.
March 27, 2017
1 year ago
great part
The part was easy to put on. took about 20 min each side. So far no problems.
March 20, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 28 answers
Is this for fwd or 4wd?
Nicole M on Apr 17, 2017
BEST ANSWER: These should fit either 2WD or 4WD.
is this the complete struts assembly ?
strut, spring, bumper, bearing all assembled, ready for direct replacement?
michael m on Jul 22, 2016
BEST ANSWER: Yes these are complete
Are these designed for XLT 4WD application?
Mark S on Jan 17, 2018
BEST ANSWER: I am not 100% sure but I have a 2011 4wd xlt and they bolted right in no problem. I have had them in for about 6 months with no issues. They fixed my strut mount problem I was having. I would definitely suggest them makes life a lot easier then replacing just the mount
Does these bring two strut or one for the price?
Manuel R on Mar 22, 2018
BEST ANSWER: When I bought it, it was with 2 struts and springs already attached. Great price, I couldn���t find a better price anywhere else for a brand new product. I do recommend.
what size sockets will i need to remove and install these struts?
Tommy L on Jul 27, 2018
BEST ANSWER: 12, 13, 14,15, 17, 18, 19 MM sockets and wrenches. It's a Ford, they like to use alot of different size nuts and bolts.
Are gas or hydraulic shock? Are those monroe?
mijail18 on Jun 13, 2017
BEST ANSWER: These are gas charged shocks. They are our own house brand, and are not supplied by Monroe.
What type of vehicle will they fit?
Joey K on Mar 21, 2017
BEST ANSWER: These parts will fit only 2011 to 2012 Ford Explorers in the front.

Vehicle Fit

Year Make Model Description
2011-2012Ford Explorer Ford Explorer Front Strut & Spring Assembly Pair TRQ SCA57244

This part replaces:

  • TRQ SCA57244
  • Monroe 172620
  • Monroe 172621
Part #: 1ASSP01195

Out of Stock

Brand #: SCA57244