Replaces

2010-16 Chevy Equinox GMC Terrain Strut & Spring Assembly Pair - 1ASSP01128

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Pre-assembled, loaded strut & spring assemblies allow for a quicker, safer install than replacing with just bare struts. 

Trouble-Free Install

Trouble-free install includes the matched parts needed to get the job done. New mounts, bearings, springs and hardware will provide a better ride for your vehicle and save you time from not having to do the job again because a used part failed afterwards.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:47)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Links (1:17)
    • Grab the back side of the sway bar with locking pliers
    • Remove the 17mm nut from the sway bar link
    • Remove the sway bar link from the strut
  3. step : Removing the Front Strut (1:51)
    • Remove the 13mm bolt securing the flexible brake hose and ABS harness
    • Remove the lower strut bolts from the spindle with a 15mm open wrench and 21mm socket and breaker bar
    • Tap the bottom bolts out with a hammer
    • Remove the three 13mm bolts on the top of the strut
    • Remove the strut from the vehicle
  4. step : Installing the Front Strut (4:56)
    • Install the strut into the vehicle
    • Tighten the three 13mm bolts to the top of the strut
    • Torque the strut mount bolts to 18 foot-pounds
    • Tighten the 13mm bolts to the bottom of the strut
    • Torque the bolts to 136 foot-pounds
    • Reinstall the 13mm bolts to the ABS harness
  5. step : Installing the Sway Bar Links (2:07)
    • Insert the sway bar link into place
    • Tighten the bar with vise grip pliers
    • Tighten the 17mm nut
    • Torque the top nut to 63 foot-pounds
  6. step : Reattaching the Wheel (7:37)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • Complete Metric Socket Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2010-2016 Chevy Equinox Front Strut & Spring Assembly Pair (excluding 19 Inch Wheels) for Models without Sport Suspension
  • 2010-2016 GMC Terrain Front Strut & Spring Assembly Pair (excluding 19 Inch Wheels) for Models without Sport Suspension

This part replaces:

  • Hollander 527-01809R
  • Hollander 527-01810L
  • Monroe 272527
  • Monroe 272526
  • KYB SR4198
  • KYB SR4197
Part #: 1ASSP01128


How-to Video:

(08:12 min)