Replaces

2010-16 Chevy Equinox GMC Terrain Brake Kit Nakamoto CD1275, 55178 - 1ABFS02601

Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 4 Piece Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a Pair
    • Includes LH (Driver Side) & RH (Passenger Side) Rear
  • Fits 5 Lug Wheel
  • 11.93" (303mm) diameter vented

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:30)
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:29)
    • Remove the 14mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  3. step : Removing the Brake Rotor (3:26)
    • Remove the 15mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Make sure the parking brake is off
    • Remove the T30 Torx screw from the rotor
    • Pry out the rubber plug if needed and adjust the parking brake adjustor with a flat blade screwdriver
    • Pull the rotor off
  4. step : Installing the New Brake Rotor (7:16)
    • Slide the rotor on and line it up with the appropriate holes in place
    • Adjust the parking brake adjuster if needed
    • Tighten the T30 screw into the rotor
    • Press on the rubber cap
    • Clean both sides of the rotor with brake parts cleaner
    • Adjust the emergency brake, if necessary
    • Clean the caliper bracket with a wire brush
    • Put the bracket back into place
    • Tighten the 15mm bolts
    • Torque the bolts to 92 foot-pounds
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
  5. step : Installing the New Brake Pads (12:11)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Clean the slides with a wire brush
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on with a flat blade screwdriver
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread 14mm bolts by hand
    • Tighten bolts to 20 foot-pounds
  6. step : Reattaching the Wheel (13:05)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 125 foot-pounds in a crossing or star pattern
  7. step : Testing the Brakes (13:40)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Hammer
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Anti-Seize Grease
  • Cloth Rags

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 22mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

  • Wrenches - Metric

  • 14mm Wrench
  • 15mm Wrench

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
1
0
0
0
Fast shipping great nproduct for a really good price
Nakamoto makes high quality brake pads and calipers. I replaced my front ones in November and the are holding up well, I just replaced the rears and so far so good
April 9, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2010-2016 Chevy Equinox Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2010-2016 GMC Terrain Rear Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Reference Number CD1275
  • Reference Number 900824
  • Hollander 533-00166
  • Nakamoto CD1275, 55178
Part #: 1ABFS02601


Nakamoto
Brand #: CD1275, 55178

How-to Video:

(14:08 min)