Replaces

2010-15 Chevy Camaro Wheel Bearing & Hub Assembly Pair - 1ASHS00932

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   Pair

Specifications:

  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side) Rear
  • 3 Bolt Flanges
  • Fits 5 Lug Wheels
  • New wheel studs installed
  • Direct replacements
  • Built to strict quality control standards

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA54369 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:56)
    • Loosen the 22mm lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Separating the Axle from the Hub (1:19)
    • Put the transmission in gear
    • Put the parking brake on
    • Loosen the 32mm axle nut
    • Remove the axle nut
    • Loosen the axle spines with a hammer and punch
  3. step : Removing the Brakes (1:54)
    • Remove the two 16mm bolts from the brake caliper
    • Pull off the brake caliper
    • Hang the caliper aside with bungee cords
    • Remove the T30 Torx screw from the brake rotor
    • Release the parking brake
    • Tap the face of the rotor with a hammer to loosen it
    • Pull off the brake rotor
  4. step : Removing the Hub (3:12)
    • Remove the four 13mm bolts that hold the hub to the wheel spindle
    • Apply a two-jaw puller to the hub
    • Tighten the puller with a socket and ratchet
    • Remove the two-jaw puller
    • Pull the hub off the axle
    • Pull the washer off the axle with a pick
  5. step : Installing the Hub (4:21)
    • Slide the new washer onto the axle
    • Slide the bearing splines onto the axle
    • Start the four 13mm bolts that hold the hub to the wheel spindle
    • Tighten the 13mm bolts to 85 foot-pounds of torque
  6. step : Installing the Brakes (5:04)
    • Put the rotor into place
    • Insert the T30 screw into the rotor
    • Remove the bungee cord from the caliper
    • Put the caliper into pace
    • Start the two 16mm bolts into the caliper
    • Tighten the 16mm bolts to 30 foot-pounds
    • Tighten the 16mm bolts 90 degrees further
  7. step : Installing the Wheel (5:59])
    • Start the axle nut onto the axle
    • Tighten the axle nut to 200 foot-pounds
    • Slide the wheel into place
    • Start the five 22mm lug nuts
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 140 foot-pounds in a star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Center Punch
  • Pick
  • Floor Jack
  • Funnel

  • Materials, Fluids, and Supplies

  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

  • Specialty Tools

  • 2 Jaw Gear Puller

  • Torx Drivers & Sockets

  • T30 Torx Bit

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Fast, accurate,hassle free customer service
I have ordered parts online before, but never with ease. I introduced my father to your online store a d he ordered similar parts for his 2003 Silverado. The right parts at a very good price seems hard to believe. But A1 Auto has convinced us both and will be recommended to friends and family. The parts were exactly as advertised and arrive a day early. Also your site post life saving videos on DIY repairs pertaining to the parts in question. Thanks A1 Auto. You guys and ladies are the best
September 27, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2010-2015Chevy Camaro Chevy Camaro Rear Wheel Bearing & Hub Assembly Pair V6 3.6L with Manual Transmission
2010-2015Chevy Camaro Chevy Camaro Rear Wheel Bearing & Hub Assembly Pair V8 6.2L (excluding ZL1 Models)
Part #: 1ASHS00932


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:03 min)