Replaces

2010-14 Chevy Camaro Brake Kit Nakamoto CD1404, 13501320 - 1ABFS01035

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Front Brake Rotor Specifications:
      Vented
      5 Lug
      12.60" (320mm)
  • Brake Pad Friction Material:   Ceramic
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (2) Front Replacement Brake Rotors
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade Ceramic Enhanced Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Come as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 13501297, 13501320, 13502214
  • Fits 5 Stud Wheels
  • Vented
  • 12.64" (320mm) diameter

This brake rotor & pad set makes great replacements and has excellent value over the price of dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:55)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brakes (1:29)
    • Put a 17mm wrench on one lug stud to counter-hold the rotor
    • Remove the T30 Torx bolt from the brake rotor
    • Remove the two 14mm slide bolts from the brake caliper
    • Pull off the brake caliper
    • Hang the caliper aside with a bungee cord
    • Remove the two 18mm bolts from the caliper bracket
    • Pull off the caliper bracket
    • Strike the rotor with a hammer if necessary
    • Pull off the rotor
    • Tap the pads out of the caliper bracket with a hammer
  3. step : Preparing the Brakes (3:33)
    • Pry the brake shims off the caliper bracket with a flat blade screwdriver
    • Clean the caliper bracket with a wire brush
    • Clean the shims with a wire brush
    • Apply brake grease to the caliper bracket
    • Press the shims onto the caliper bracket
    • Apply brake grease to the shims
    • Slide the guide pins out of the caliper bracket
    • Clean any old grease or debris off the guide pins
    • Apply grease to the guide pins
    • Slide the guide pins into the caliper bracket
    • Clean the hub surface with a wire brush
    • Apply grease to the hub surface
  4. step : Installing the Brakes (5:49)
    • Slide the rotor onto the hub backwards
    • Spray brake parts cleaner onto the back of the rotor
    • Install the rotor onto the hub normally
    • Spray brake parts cleaner onto the front of the rotor
    • Install the T30 Torx screw into the rotor
    • Put the caliper bracket into place
    • Install the two 18mm bolts into the bracket
    • Tighten the two 18mm bolts to 44 foot-pounds of torque
    • Tighten the 18mm bolts a further 90 degrees
    • Install the brake pads into the caliper brackets
    • Apply brake grease to the back of the brake pads
    • Release the brake caliper
    • Compress the caliper piston with pliers
    • Slide the caliper onto the bracket
    • Install the two 14mm guide pin screws into caliper
    • Hold the guide pins with pliers
    • Tighten the guide pin bolts to 20 foot-pounds
  5. step : Installing the Wheel (8:24)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 144 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Paper Towels
  • Brake Parts Cleaner
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 17mm Socket
  • 14mm Socket
  • 22mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this come with replacement bolts?
Ryan C September 3, 2017
No, this brake kit does not come with any new hardware.
Tim K September 3, 2017
Year Make Model Description
2010-2014Chevy Camaro Chevy Camaro V6 3.6L Front Premium Posi Ceramic Brake Kit Nakamoto
Part #: 1ABFS01035

Out of Stock

Nakamoto
Brand #: CD1404, 13501320

How-to Video:

(09:05 min)