2010-13 Chevy Camaro Headlight - 1ALHL01917

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Light Option:   Halogen


  • Fits RH (Passenger Side)
  • Replaces dealer part number: 92232125
  • Includes lens and housing
  • Bulbs are not included
  • Fits models with Halogen headlights only
    • Does NOT fit models with HID (High Intensity) Headlights
This headlight is a great replacement and has good cost savings over a headlight from the dealer.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing the Bumper (0:30)
    • Remove the plastic clips along the top edge of the bumper
    • Remove the 10mm screw at the top corner of the bumper bracket on each side
    • Remove the two 10mm bolts below the bumper
    • Remove the T20 Torx from the wheel well
    • Peel back the liner and remove the 10mm bolt on either end
    • Remove the 7mm bolt
    • Repeat the process on the other side
    • Disconnect the bumper harness
    • Remove the bumper
  2. step : Removing the Headlights (2:44)
    • Remove the four 7mm bolts from the headlight bracket
    • Pull the headlight out
    • Disconnect the headlight wiring harness
  3. step : Installing the Bumper (5:36)
    • Connect the harness to the front bumper
    • Line up the tabs on the fender and press the bumper into place
    • Tighten the 10mm bolt into the bumper bracket
    • Tighten the 7mm screw into the bumper bracket
    • Reinstall the T20 Torx screws into the wheel well
    • Reinstall the 10mm screws at the bottom of the bumper
    • Clip in the plastic clips to the top of the bumper
    • Tighten the 10mm bolt in each corner

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 10mm Socket

  • Torx Drivers & Sockets

  • T20 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2010-2013Chevy Camaro Chevy Camaro Halogen Headlight Passenger Side
Part #: 1ALHL01917

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:17 min)