Specifications

  • Fits LH (Driver Side)
  • Direct replacement
  • Replaces dealer part number: 92218023
  • Built to strict quality control standards
This fog light bezel is a great replacement and has good cost savings over a bezel from the dealer.

Note:

It is necessary to reuse your original hardware, as new hardware is not included with this item.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Fog Light Bezel (0:29)
    • Remove the three T20 Torx bolts from the fender liner
    • Pry out the clips from the top of the wheel well liner
    • Release the five clips from the fog light bezel
    • Remove the fog light bezel
  2. step : Removing the Fog Light (2:08)
    • Compress the clips to loosen the fog light
    • Disconnect the connector
    • Remove the light
  3. step : Installing the Fog Light (2:51)
    • Press the fog light in with the longer clip on the bottom
  4. step : Installing the Fog Light Bezel (3:10)
    • Press the bezel into the bumper
    • Connect the connector
    • Adjust the fog light with a Phillips screwdriver
    • Tighten the three T20 Torx screws to the fender liner
    • Clip the clips to the wheel well liner

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Torx Drivers & Sockets

  • T20 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2010-2013 Chevy Camaro Fog Light Bezel Driver Side

This part replaces:

  • Partslink GM1038118
  • OE # 92218023
  • DEPO 335-2503L-UD
Only 2 left in stock
Part #: 1ABMX00160

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:10 min)