Replaces

2010-12 Chevy Camaro Strut & Spring Assembly Pair - 1ASSP01420

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:58)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Front Strut and Spring Assembly (1:31)
    • Grab the sway bar link joint with pliers
    • Loosen the 15mm nut with a socket and ratchet
    • Remove the sway bar link from the strut
    • Pry the ABS sensor wire out of its retainer in the strut
    • Loosen the 10mm bolt on the brake line brace
    • Remove the two 24mm lower strut bolts
    • Undo the cover on the top of the strut
    • Loosen the 24mm nut on top of the strut
    • Use a 7mm allen key and locking pliers with 24mm wrench if the nut spins
    • Remove the strut
  3. step : Installing the Front Strut and Spring Assembly (5:27)
    • Reinstall the strut into the vehicle
    • Hand-tighten the top nut
    • Insert the steering knuckle into the strut
    • Tighten the lower bolts
    • Torque the bolts to 59 foot-pounds
    • Add 180 degress of torque to the bolts
    • Reinstall the brake hose into the retainer
    • Tighten the 10mm bolt to the retainer
    • Pop the ABS sensor into the bracket
    • Reinstall the sway bar link into the strut
  4. step : Reattaching the Wheel and Torqueing the Strut (7:33)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 140 foot-pounds in a crossing or star pattern
    • Torque the top strut nut to 52 foot-pounds

Tools needed for replacement:

    Allen Wrenches

  • 7mm Allen Wrench

  • General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

  • Specialty Tools

  • Torque Angle Gauge

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
1aAauto. Was vety helpful in my. Purchase. In. Me. Buying. My struts. For my camaro. I will. Differently. Will. Buy. From. 1AAuto. Again and. Again in the. Near future. And ive Told my. Friends and family
April 6, 2018
More than parts
This review is more than just about the replacement parts carried by 1 A auto. Those were a perfect fit, well made and at a good price. What impressed me was their service. First shipment only one part arrived and the strut/spring fell out when I picked it up off the porch. Called the 800 number and minutes later had a email with a replacement order number. Two days later both boxes showed up and I was able to do the repair. Excellent parts and service. I even ordered brake pads and rotors that weekend. I’m gonna be a steady customer
April 18, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2010-2012Chevy Camaro Chevy Camaro Front Strut & Spring Assembly V6 3.6L Pair
Part #: 1ASSP01420


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:33 min)