Replaces

2010-12 Chevy Camaro Strut & Spring Assembly Pair Monroe Quick-Strut 172336, 172337 - MNSSP01072

Why Buy Monroe Quick-Strut Assemblies?

Monroe Quick-Strut assemblies are high quality and easy-to-install. Some of its benefits include:

  • Application specific technology
  • Restores factory ride height and feel
  • Quicker installation time than bare strut assemblies
  • Pre-assembled and no compression tool required
    • Includes new mount, bearing, coil spring, isolators, boot, and strut
  • Nitrogen gas charged

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:58)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Front Strut and Spring Assembly (1:31)
    • Grab the sway bar link joint with pliers
    • Loosen the 15mm nut with a socket and ratchet
    • Remove the sway bar link from the strut
    • Pry the ABS sensor wire out of its retainer in the strut
    • Loosen the 10mm bolt on the brake line brace
    • Remove the two 24mm lower strut bolts
    • Undo the cover on the top of the strut
    • Loosen the 24mm nut on top of the strut
    • Use a 7mm allen key and locking pliers with 24mm wrench if the nut spins
    • Remove the strut
  3. step : Installing the Front Strut and Spring Assembly (5:27)
    • Reinstall the strut into the vehicle
    • Hand-tighten the top nut
    • Insert the steering knuckle into the strut
    • Tighten the lower bolts
    • Torque the bolts to 59 foot-pounds
    • Add 180 degress of torque to the bolts
    • Reinstall the brake hose into the retainer
    • Tighten the 10mm bolt to the retainer
    • Pop the ABS sensor into the bracket
    • Reinstall the sway bar link into the strut
  4. step : Reattaching the Wheel and Torqueing the Strut (7:33)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 140 foot-pounds in a crossing or star pattern
    • Torque the top strut nut to 52 foot-pounds

Tools needed for replacement:

    Allen Wrenches

  • 7mm Allen Wrench

  • General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

  • Specialty Tools

  • Torque Angle Gauge

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2010-2012 Chevy Camaro Front Strut & Spring Assembly Pair V6 3.6L Monroe Quick-Strut 172336, 172337

This part replaces:

  • Monroe Quick-Strut 172336, 172337
Only 1 left in stock
Part #: MNSSP01072


Monroe Quick-Strut
Brand #: 172336, 172337

How-to Video:

(08:33 min)