2010-11 Toyota Prius Tail Light Pair - 1ALTP00702

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair

These replacement Tail lights are just what you need to get your vehicle in good looking form again!


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part number: 81561-47111, 81561-47110, 81551-47111, 81551-47110, 8156147111, 8156147110, 8155147111, 8155147110
  • Includes lenses & housings
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacements

These Tail lights make great replacements and have good cost savings over dealer units.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Bumper (0:23)
    • Remove the Philips head screws on the bumper under the taillight
    • Remove all the 10mm bolts that hold the bumper in the wheel wells
    • Remove the plastic nut located under the car
    • Remove the plastic clips at the bottom of the bumper
    • Pull the bumper straight out from the sides to unclip it
    • Pull the bumper cover off
  2. step : Removing Interior Trim (4:19)
    • Unlock the trunk floor
    • Remove the trunk floor
    • Remove the tool tray
    • Remove the plastic trays
    • Remove the long trim piece by prying straight up
    • Use a 10mm bolts t remove the cargo tie-down hooks
    • Fold down the back seats
    • Remove the screws that hold in the side trim panel
    • Slide the seatbelt out of its slot
    • Work the panel back and forth until it comes off
    • Repeat the procedure for the opposite side
  3. step : Removing the Taillight (7:31)
    • Unplug the wiring harness
    • Remove the two 10mm nuts using a wrench or a deep 10mm socket
    • Use a plastic prying tool to help unclip the taillight clip from the quarter panel
  4. step : Reinstalling the New Taillight (9:42)
    • Line up all the clips and studs
    • Press the headlight in place
    • Reinstall the two 10mm nuts
    • Snug them down
    • Reconnect the electrical connection
  5. step : Reinstalling the Bumper Cover (11:01)
    • Line up the bumper cover
    • Snap it into place
    • Insert all the plastic clips
    • Insert all the 10mm bolts that were removed then snug them down
    • Insert all the screws and snug them down
  6. step : Reinstalling the Interior Trim Pieces (15:38)
    • Reinstall the side trim panel
    • Clip it back in place
    • Reinstall the lock and the screw that hold the panel in
    • Reinstall the cargo tie-down hooks
    • Tighten up the 10mm bolts
    • Reinstall the small side plastic panel above the battery
    • Reinstall the long trim panel and press firmly to clip it in place
    • Reinstall the side panels
    • Reinstall the cargo bucket and its cover
    • Reinstall the cargo tray
    • Reinstall the folding cover / trunk floor

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2010-2011Toyota Prius Toyota Prius Tail Light Pair
Part #: 1ALTP00702

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(20:00 min)