Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Includes both LH (Driver Side) & RH (Passenger Side) Rear
  • Direct replacements
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:53)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Drum (1:22)
    • Pry off the locking rings with needle nose pliers or a flat blade screwdriver
    • Tighten an M10 bolt into the drum to pull it off
    • Pull off the drum
  3. step : Inspecting the Brakes (2:04)
    • Check the thickness of the brake shoes
    • Check for gouges on the drum
  4. step : Removing the Brake Shoes (2:24)
    • Remove the brake shoe springs with the vise grip pliers
    • Hold the front retaining pin in place by hand
    • Twist off the front retaining spring with the vise grip pliers
    • Remove the brake adjuster
    • Hold the rear retaining pin in place by hand
    • Twist off the rear retaining spring with the vise grip pliers
    • Remove the rear brake shoe
    • Pry the emergency brake cable out of the front brake shoe
  5. step : Installing the New Brake Shoes (3:50)
    • Pry the emergency brake cable into the front brake shoe slot with vise grip pliers
    • Clean the backing plate friction points with a wire brush
    • Apply white grease to the friction points
    • Lift the front brake shoe into place
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining spring with vise grip pliers
    • Put the rear brake shoe into place
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining spring with vise grip pliers
    • Put the adjuster into place
    • Push the brake shoes together by hand
    • Put the adjuster clip into place
    • Hook the springs on with the vise grip pliers
  6. step : Installing the New Brake Drum (6:38)
    • Try to slide the brake drum on
    • If necessary turn the adjuster wheel with a flat blade screwdriver
    • The brake rotor should slide on with some resistance
  7. step : Reattaching the Wheel (7:22)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (7:49)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Wire Brush

  • Materials, Fluids, and Supplies

  • White Grease
  • M10 x 7cm bolts

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Needle nose pliers
  • Vise Grip Pliers

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 22mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2009-2013Chevy Silverado 1500 Chevy Silverado 1500 Rear Drum Brake Hardware Kit
2009-2013GMC Sierra 1500 GMC Sierra 1500 Rear Drum Brake Hardware Kit
Only 3 left in stock
Part #: 1ABRX00061


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:18 min)