Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Comes as a Pair
  • Includes LH (Driver Side) & RH (Passenger Side) Rear
  • Direct replacement
  • Fits 6 stud wheels
  • 13.21" (335mm) Outside diameter

Part Details

  • Quantity: Pair

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:53)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Drum (1:22)
    • Pry off the locking rings with needle nose pliers or a flat blade screwdriver
    • Tighten an M10 bolt into the drum to pull it off
    • Pull off the drum
  3. step : Inspecting the Brakes (2:04)
    • Check the thickness of the brake shoes
    • Check for gouges on the drum
  4. step : Removing the Brake Shoes (2:24)
    • Remove the brake shoe springs with the vise grip pliers
    • Hold the front retaining pin in place by hand
    • Twist off the front retaining spring with the vise grip pliers
    • Remove the brake adjuster
    • Hold the rear retaining pin in place by hand
    • Twist off the rear retaining spring with the vise grip pliers
    • Remove the rear brake shoe
    • Pry the emergency brake cable out of the front brake shoe
  5. step : Installing the New Brake Shoes (3:50)
    • Pry the emergency brake cable into the front brake shoe slot with vise grip pliers
    • Clean the backing plate friction points with a wire brush
    • Apply white grease to the friction points
    • Lift the front brake shoe into place
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining spring with vise grip pliers
    • Put the rear brake shoe into place
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining spring with vise grip pliers
    • Put the adjuster into place
    • Push the brake shoes together by hand
    • Put the adjuster clip into place
    • Hook the springs on with the vise grip pliers
  6. step : Installing the New Brake Drum (6:38)
    • Try to slide the brake drum on
    • If necessary turn the adjuster wheel with a flat blade screwdriver
    • The brake rotor should slide on with some resistance
  7. step : Reattaching the Wheel (7:22)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (7:49)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Wire Brush

  • Materials, Fluids, and Supplies

  • White Grease
  • M10 x 7cm bolts

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Needle nose pliers
  • Vise Grip Pliers

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 22mm Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Chevy Silverado Drum Brakes
Great quality, Low price and great customer service. Suggest that you do not disconnect the emergency brake cable, It is a bear to get back on because the spring needs to be compressed. Just pull locking clip off to separate e-brake arm from brake shoe. Much easier.
February 2, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2009-2013Chevy Silverado 1500 Chevy Silverado 1500 Rear Brake Drum Pair
2009-2013GMC Sierra 1500 GMC Sierra 1500 Rear Brake Drum Pair
Part #: 1ABDS00329


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:18 min)