Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit


  • RH (Passenger Side)
  • Replaces dealer part numbers: 33100-SZA-A01, 33100SZAA01
  • Includes lens and housing
  • Bulbs not included
  • Correct for models with Halogen Style Headlights
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing the Front Bumper (0:28)
    • Pry up the push clips from the radiator shield
    • Remove the two 10mm bolts from the grille
    • Remove the Phillips head screw from the fender
    • Pry the push pins out from beneath the bumper
    • Remove the two 10mm bolts from beneath the bumper
    • Pry the bumper out from the sides
    • Disconnect the wiring harness
    • Remove the bumper cover
  2. step : Removing the Headlights (4:10)
    • Remove the three lower 10mm bolts
    • Remove the upper 10mm bolt
    • Pry the push clip and remove it with needle nose pliers
    • Pull the headlight straight out
    • Disconnect the wiring harnesses
  3. step : Installing the Headlights (7:32)
    • Remove the covers from the headlight sockets
    • Transfer the old sockets to the new headlight
    • Remove the lower 10mm bolts from the headlight bracket
    • Transfer the headlight bracket over to the new light
    • Tighten the 10mm bolt to the headlight bracket
    • Connect the headlight wiring connectors
    • Tighten the upper 10mm bolt
    • Tighten the three lower 10mm bolts
    • Press the pushpin to the headlight
  4. step : Installing the Front Bumper (12:00)
    • Insert the bumper into place
    • Connect the electrical connectors
    • Press the bumper into place
    • Tighten the two 10mm bolts beneath the bumper
    • Press the push pins into the bottom of the bumper
    • Tighten the Phillips head screw to the fender
    • Tighten the two 10mm bolts to the grille
    • Press the push clips into the radiator shield
  5. step : Aiming the Headlights (16:08)
    • Locate the axis of the headlights, the center point of the headlight bulb
    • Transfer the mark to a vertical wall
    • Mark the wall at the height of the axis mark
    • Back the vehicle up 25 feet
    • Locate the adjusting screw
    • Turn the headlights on
    • Rotate the screw until the passenger beam is two inches below the mark on the wall
    • Rotate the screw until the driver side beam is four inches below the mark

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2009-2011Honda Pilot Honda Pilot Headlight Passenger Side
Part #: 1ALHL01871

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(17:49 min)