Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

Fit guaranteed

  • This pair of headlamps will install just as your originals do. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight set should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing discolored, scratched, dull or damaged headlights with a new pair from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new pair of headlights can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new pair of headlights from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing the Front Bumper (0:28)
    • Pry up the push clips from the radiator shield
    • Remove the two 10mm bolts from the grille
    • Remove the Phillips head screw from the fender
    • Pry the push pins out from beneath the bumper
    • Remove the two 10mm bolts from beneath the bumper
    • Pry the bumper out from the sides
    • Disconnect the wiring harness
    • Remove the bumper cover
  2. step : Removing the Headlights (4:10)
    • Remove the three lower 10mm bolts
    • Remove the upper 10mm bolt
    • Pry the push clip and remove it with needle nose pliers
    • Pull the headlight straight out
    • Disconnect the wiring harnesses
  3. step : Installing the Headlights (7:32)
    • Remove the covers from the headlight sockets
    • Transfer the old sockets to the new headlight
    • Remove the lower 10mm bolts from the headlight bracket
    • Transfer the headlight bracket over to the new light
    • Tighten the 10mm bolt to the headlight bracket
    • Connect the headlight wiring connectors
    • Tighten the upper 10mm bolt
    • Tighten the three lower 10mm bolts
    • Press the pushpin to the headlight
  4. step : Installing the Front Bumper (12:00)
    • Insert the bumper into place
    • Connect the electrical connectors
    • Press the bumper into place
    • Tighten the two 10mm bolts beneath the bumper
    • Press the push pins into the bottom of the bumper
    • Tighten the Phillips head screw to the fender
    • Tighten the two 10mm bolts to the grille
    • Press the push clips into the radiator shield
  5. step : Aiming the Headlights (16:08)
    • Locate the axis of the headlights, the center point of the headlight bulb
    • Transfer the mark to a vertical wall
    • Mark the wall at the height of the axis mark
    • Back the vehicle up 25 feet
    • Locate the adjusting screw
    • Turn the headlights on
    • Rotate the screw until the passenger beam is two inches below the mark on the wall
    • Rotate the screw until the driver side beam is four inches below the mark

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.00/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
0
0
0
0
Pilot 2011 headlights
Fit my wifes 2011 Honda Pilot perfectly. After finding a proper video on youtube about how to install them, the old ones were out and new ones in place in about an hour and a half. As usual, fast shipping and arrival. Thank you again 1A auto!
March 21, 2017
My truck looks brand new and it cost one-fifth the dealership price.
July 25, 2017
Honda Pilot
Fit perfectly, great price and really fast shipping!
September 13, 2017
Changed the appearance!!!
Wow! One of the original headlights looked really bad. The other one wasnt so bad, but I decided to replace them both so they would look the same. It changed the look of the front completely. Looks new now instead of weathered/worn. They arrived in great shape and very quickly. The fit was perfect! Would definitely recommend to anyone needing replacements.
February 23, 2018
Great quality- easy install with how to video!!
Fast shipping! Great quality and easy to install Glad I got the pair vs. just 1 otherwise one would have looked old and very cloudy vs. the new
February 23, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this kit includes the plastic cover over the headlights? If not how can I find it?
Leon B December 27, 2016
yes, the lens cover is sealed onto the lamp assembly from the factory. Its not something that is available seperatly
Brian F December 28, 2016
Year Make Model Description
2009-2011Honda Pilot Honda Pilot Headlight Pair
Part #: 1ALHP00883


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(17:49 min)