Replaces

2009-10 Nissan Murano Tail Light - 1ALTL00975

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement tail light is just what you need to get your vehicle in good looking form again!

Tail Light Specifications

  • LH (Driver Side)
  • Replaces dealer part numbers: 26555-1AA0A, 265551AA0A
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Includes tail light lens and housing

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Nissan tail light makes a great replacement and has good cost savings over a dealer unit.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Tail Light (0:27)
    • Open the hatch
    • Pry out the side trim from the tail light with a trim tool or flat blade screwdriver
    • Remove the two 10mm bolts from the tail light
    • Pry out the pins holding the tail light to the body to release the tail light
    • Pull the tail light out
    • Pry up the grommet and wiring
    • Press the tab and disconnect the connector
  2. step : Servicing the Tail Light Bulbs (3:03)
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
    • Side marker light is a 194 bulb
    • Turn signal bulb is a 7440 bulb
  3. step : Reinstalling the Tail Light (3:55)
    • Connect the connector
    • Press the wire and grommet into the body
    • Press the tail light into place
    • Tighten the 10mm bolts to the tail light
    • Align the tabs on the trim with the holes on the tail light

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2009-2010Nissan Murano Nissan Murano Outer Tail Light Driver Side
Part #: 1ALTL00975


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:30 min)