Replaces

2008-13 Nissan Rogue Brake Kit Front Nakamoto CD1338, 31512 - 1ABFS00828

This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade Ceramic Enhanced Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Come as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 40206J600A, 40206 J600A, 40206JG00A, 40206 JG00A
  • Fits 5 Stud Wheels
  • Vented
  • 11.65" (296mm) diameter

This brake rotor & pad set makes great replacements and has excellent value over the price of dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:50)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brakes (1:27)
    • Remove the two 14mm guide pin bolts from the caliper
    • Pull off the brake caliper
    • Hang the caliper aside with a bungee cord
    • Remove the two 19mm bolts from the caliper bracket
    • Pull off the caliper bracket
    • Slide off the brake rotor
    • Remove the brake pads from the caliper bracket
  3. step : Preparing the Brakes (3:12)
    • Pry the shims off the caliper bracket with a flat blade screwdriver
    • Clean the caliper bracket with a wire brush
    • Clean the brake shims with a wire brush
    • Apply brake grease to the shim mounting area on the caliper bracket
    • Clip the shims onto the caliper bracket
    • Pull out the caliper slide pins
    • Clean any old grease or debris off the pins with a paper towel
    • Apply brake grease to the pins
    • Slide the pins into the bracket
    • Clean the hub surface with a wire brush
    • Use a power sander if necessary
    • Apply brake grease to the hub surface
  4. step : Installing the Brakes (5:09)
    • Slide the rotor onto the hub backwards
    • Spray the back of the rotor with brake parts cleaner
    • Slide off the rotor
    • Slide the rotor onto the hub normally
    • Spray the front of the rotor with brake parts cleaner
    • Put the caliper bracket into place
    • Install the two 19mm bolts into the caliper bracket
    • Put the brake pads into the caliper bracket
    • Apply brake grease to the back of the pads
    • Compress the brake caliper piston with pliers
    • Remove the bungee cord
    • Place the caliper onto the bracket
    • Fasten the 14mm bolts into the caliper
  5. step : Installing the Wheel (6:42)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds of torque in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Brake Parts Cleaner
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 18mm Socket
  • 19mm Socket
  • 14mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(07:30 min)

Tools List:

    General Tools

  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Brake Parts Cleaner
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 18mm Socket
  • 19mm Socket
  • 14mm Socket



This part replaces:

  • Nakamoto CD1338, 31512

Vehicle Fit

  • 2008-2013 Nissan Rogue Front Premium Posi Ceramic Brake Kit Nakamoto
Part #: 1ABFS00828

Out of Stock

Nakamoto
Brand #: CD1338, 31512

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More