Specifications:

  • RH (Passenger Side)
  • Replaces dealer part number: 33100-TA0-A01, 33100TA0A01
  • Includes lens and housing
  • Bulbs not included
  • Direct replacement for Halogen Style Headlight
  • Fits 4 Door Sedan Models only
This headlight is a great replacement and has good cost savings over a headlight from the dealer.
Fit guaranteed
  • This headlamp will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing a discolored, scratched, dull or damaged headlight with a headlight from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new headlight can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new headlight from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Bumper Cover (0:20)
    • Remove the eight push clips from the upper grille cover with a flat blade screwdriver
    • Slide off the upper grille cover
    • Remove the Phillips screw from the recess in either end of the bumper
    • Remove the 10 push clips along the bottom front edge of the bumper
    • Pop the bumper up off the upper pins on each side
    • Pry each edge of the bumper out of its clips
    • Lift the bumper up and off
  2. step : Removing the Headlight (4:16)
    • Remove the 10mm bolt from atop the headlight
    • Remove the two 10mm bolts from the headlight bracket
    • Lift the headlight out and off
    • Disconnect the wiring harness
    • Remove the headlight
    • Remove the 10mm bolt from the headlight bracket
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  3. step : Installing the Headlight (7:06)
    • Insert the headlight bracket onto the headlight
    • Tighten the 10mm bolt to the headlight
    • Connect the wiring harnesses
    • Insert the headlight into place
    • Tighten the 10mm bolts to the bracket
    • Tighten the 10mm bolt atop the headlight
  4. step : Installing the Bumper Cover (10:50)
    • Insert the bumper into the upper pins
    • Press the bumper into its clips
    • Press in the 10 push clips along the bottom front edge of the bumper
    • Tighten the Phillips screw to the recess in either end of the bumper
    • Insert the upper grille cover into place
    • Press in the eight push clips to the upper grille cover
    • Insert the bumper into the upper pins
    • Press the bumper into its clips
    • Press in the 10 push clips along the bottom front edge of the bumper
    • Tighten the Phillips screw to the recess in either end of the bumper
    • Insert the upper grille cover into place
    • Press in the eight push clips to the upper grille cover

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2008-2012 Honda Accord 4 Door Sedan Headlight Passenger Side

This part replaces:

  • OE # 33100TA0A01
  • Partslink HO2503130
  • Hollander 114-50554R
  • TYC 20-6879-00-1
  • DEPO 317-1154R-AF2
Part #: 1ALHL01516



How-to Video:

(15:37 min)