This replacement Tail light is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits LH (Driver Side)
  • Replaces dealer part number: 5160361AA
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Includes Tail light lens and housing

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Tail light makes a great replacement and has good cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Tail Light (0:32)
    • Open the trunk
    • Remove the two clips from the side of the tail light with a flat blade screwdriver
    • Pull straight out on the tail light
  2. step : Servicing the Bulbs (1:09)
    • Twist the bulb socket counterclockwise out the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  3. step : Replacing the Tail Light Bulbs (1:28)
    • This step is only necessary if you are replacing the tail light bulbs
    • Turn the base of the bulbs counterclockwise
    • Remove the old bulbs
    • Disconnect the wiring harnesses from the old bulbs
    • Insert the new bulbs
    • Turn the base of the new bulbs clockwise
    • Connect the new bulb to the wiring harness
  4. step : Installing the New Tail Light (2:20)
    • Line up the bolt holes on the tail light bracket to the bolt holes on the vehicle
    • Replace the clips into the tail light bracket
    • Close the trunk

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Rear tail light
This part was as advertised, it fit perfectly and works great!
January 3, 2018
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2008-2012 Dodge Caliber Tail Light Driver Side

This part replaces:

  • Partslink CH2800185
  • Hollander 166-00990L
  • OE # 5160361AA
  • TYC 11-6204-90-1
  • DEPO 334-1917L-AFT
Part #: 1ALTL00963

Out of Stock

How-to Video:

(02:58 min)