MNSSP00892-2008-11 Ford Mazda Mercury Front & Rear Shock & Strut Kit

Replaces

2008-11 Ford Mazda Mercury Front & Rear Shock & Strut Kit Monroe Sensa-Trac

MNSSP00892

This part replaces:

  • Monroe Sensa-Trac MNSSP00892
FREE SAME DAY SHIPPING
Save 30%
List: $669.95 Save: $201.00
Only 1 left in stock
Part MNSSP00892
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Monroe Sensa-Trac
Brand #: MNSSP00892
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Why Buy Monroe Sensa-Trac Shock and Struts?

Monroe Sensa-Trac Shock Absorbers and Struts are designed to be direct replacements while improving handling. Some of their benefits include:

  • Application specific valving
  • Improved filtering of road noise, vibration, and harshness
  • Nitrogen gas charged
  • Upgraded sealing for longer life

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Remove the top of the shock (1:02)
    • Pop the hood and apply penetrating oil to the top four bolts.
    • Use a 14 mm socket and ratchet to remove the nuts.
  2. step : Remove the wheel (1:35)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and the tire
  3. step : Remove the bottom part of the strut (1:52)
    • Apply penetrating oil to your 10 mm brake line bracket bolt, 14mm Stabilizer link bolt and two 18 mm strut bolts.
    • Unbolt the brake line bracket bolt, and then use your 5 mm Allen wrench to stabilize the bolt and work the nut loose with your 14 mm wrench or socket.
    • Continue to loosen, apply penetrating oil, tighten, loosen, apply penetrating oil and repeat until you work it loose.
    • Use a breaker bar or pipe and ratchet to remove the 18 mm bolts.
  4. step : Install the new strut (7:00)
    • Position your strut into place and thread your 6 nuts on.
    • Torque the top four 14mm bolts to 35 ft lbs.
    • Tighten and torque the bottom two bolts to 85 ft lbs.
    • Bolt your stabilizer link back in as well as your brake line bracket.
    • Use your 14 mm socket, ratchet and 5 mm Allen wrench to install the stabilizer link.
    • The brake line bracket can be reinstalled with a 10 mm socket and ratchet.
  5. step : Put the wheel back on (9:50)
    • Replace the wheel and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large Hammer
  • Jack Stands

  • Hex Wrenches

  • 5mm Hex Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 12mm Socket
  • 13mm Socket
  • 11mm Socket
  • 14mm Socket
  • 18mm Socket
  • 19mm Socket
  • 17mm Socket
  • 10mm Socket
  • 16mm Socket

  • Wrenches - Metric

  • 16mm Wrench
  • 15mm Wrench
  • 17mm Wrench
  • 13mm Wrench
  • 12mm Wrench
  • 19mm Wrench
  • 10mm Wrench
  • 18mm Wrench
  • 14mm Wrench
  • 11mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2008-2011Ford Escape Ford Escape Front & Rear Shock & Strut Kit
2008-2011Mazda Tribute Mazda Tribute Front & Rear Shock & Strut Kit
2008-2011Mercury Mariner Mercury Mariner Front & Rear Shock & Strut Kit

Part Interchange

Brand Label Part Number
DIY Solutions SHO03716
DIY Solutions SHO03998
DIY Solutions SHO03999
DIY Solutions SHO02955

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
Monroe Sensa-Trac
Brand #: MNSSP00892
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2008-11 Ford Mazda Mercury Front & Rear Shock & Strut Kit Monroe Sensa-Trac-MNSSP00892 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.