This NEW replacement fog light set is just what you need to get your vehicle in good looking form again!


  • Sold as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Bumper Mounted
  • Replaces dealer part numbers: 7C3Z-15201-AA, 7C3Z-15200-AA, 7C3Z15201AA, 7C3Z15200AA
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement lights for factory installed lighting

This fog lamp set is a great replacement and has good cost savings over a fog light from the dealer.


Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Fog lights
Everything was fine with them. They fit well just had to take the back plate of the bumper out to get them in.
March 2, 2018
6 months ago
2008 F250 Replacement Fog Lights
The lights fit great, The lights look like they should install in minutes. This is not a 15 minute job. Suggest that some install info to go along. You need to remove the bumper stone shield (3 bolts) before you can easily access the Fog Lights. Then adjust the fog light levels before putting the shields back on. there are some awkward spots you need to get your hands into. be prepared for at least 30 minutes a side for a DIY guy
March 2, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
will the lights plug into existing wiring?
john s on Oct 16, 2017
BEST ANSWER: Yes, if the trim package is XLT or better. The connector is near the driver's headlight and pigtails off from the horn connector. You will need a new headlight switch and the fog light wiring harness. All very easy to install. For an additional $20 buy the light sensor also and you will have Auto Headlights as well. The sensor mounts in the middle of the dash. That is also pre-wired on these packages.

Vehicle Fit

Year Make Model Description
2008-2010Ford F250 Super Duty Truck Ford F250 Super Duty Truck Fog / Driving Light Pair
2008-2010Ford F350 Super Duty Truck Ford F350 Super Duty Truck Fog / Driving Light Pair

This part replaces:

  • OE # 7C3Z 15200 AA
  • OE # 7C3Z 15201 AA
  • Partslink FO2593223, FO2592223
Part #: 1ALFP00139

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout