2008-09 Subaru Outback Headlight - 1ALHL01902

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit


  • Fits LH (Driver Side)
  • Replaces dealer part numbers: 84001AG53B, 84001 AG53B
  • Includes lens & housing
  • Bulbs not included
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing the Front Bumper Cover (0:28)
    • Remove the plastic push clips at the bottom of the bumper
    • Pull the inner fender liner out of the way
    • Disconnect the electrical connection
    • Remove the clip beneath the exterior fender cover
    • Pry out the clips from the exterior fender cover to release it from the bumper cover
    • Firmly pull out the sides of the bumper cover
    • Pry up the push clips on the grille
    • Press in the clips atop the grille with a flat blade screwdriver
    • Remove the bumper cover
  2. step : Removing the Headlight (4:59)
    • Remove the 10mm bolts from the headlight
    • Pry up the push clip with a flat blade screwdriver
    • Pull the headlight straight out
    • Disconnect the wiring harnesses
    • Press the tab on the retainer with a flat blade screwdriver and remove the retainer
  3. step : Installing the Headlight (7:46)
    • Connect the plastic retainer to the headlight
    • Connect the headlight bulb wiring harnesses
    • Insert the headlight into place
    • Tighten the 10mm bolts to the headlight
    • Test the headlight
  4. step : Reinstalling the Front Bumper Cover (10:42)
    • Lift the bumper cover into place
    • Clip the sides of the bumper cover into place
    • Clip the exterior fender liner into place
    • Lock the grille clips in
    • Press in the push clips to the top of the grille
    • Press the push clip beneath the exterior fender liner in
    • Snug the fender liner into the bumper cover
    • Reconnect the electrical connection
    • Reinstall all the plastic push clips back in

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2008-2009Subaru Outback Subaru Outback Headlight Driver Side
Only 5 left in stock
Part #: 1ALHL01902

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(14:30 min)