Replaces

2008-09 Pontiac G8 Brake Rotor Pair Nakamoto 92188884 - 1ABFS01359

This front brake rotor is just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver) & RH (Passenger) Side FRONT
  • Replaces dealer part numbers: 92188884

This brake rotor makes a great replacement and has an excellent value over the price of a dealer brake rotor.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Step 1: Removing the Brake Caliper (1:12)
    • Pry center cap or hubcap to access and remove the lug nuts.
    • Jack up the car and remove the wheel.
    • Place a screw driver or pry bar into the hole on the caliper and pry out so that the piston drops into the caliper.
    • Undo the two 15 mm bolts on the back of the caliper.
    • Pull caliper off, using a screw driver to pry it off if necessary.
    • Secure caliper bracket safely to avoid stressing the brake line.
  2. step : Step 2: Removing the Caliper Bracket and rotor (3:08)
    • Pry brake pads out of the caliper bracket.
    • Remove the two 15 mm bolts on the back side of the caliper bracket (use pipe with the ratchet for more leverage).
    • Remove bracket and rotor.
  3. step : Step 3: Reinstallation of Brake Caliper (4:17)
    • Replace rotor and secure with a lug nut.
    • Replace the caliper bracket and tighten bolts to 90ft/lbs.
    • Remove caliper bracket slides and clean with a wire brush.
    • Slide brake pads into place.
    • Pull caliper down and use a c-clamp to push the piston all the way into the caliper.
    • Place the caliper back on to the bracket.
    • Clean caliper bolts and add small amount of oil.
    • Replace caliper bolts. Torque them to 50ft/lbs.
    • Remove lug nut and replace wheel.
    • Tighten lug nuts in a star pattern and replace cap.
    • Before driving, pump brakes until pedal goes solid.

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2008-2009 Pontiac G8 Brake Rotor Front Base Model Pair Nakamoto

This part replaces:

  • Nakamoto 92188884
Part #: 1ABFS01359



Nakamoto
Brand #: 92188884

How-to Video:

(09:13 min)