Replaces

2007 Brake Kit Nakamoto MD1092, MD1194, 55097-DSZ, 55133-DSZ - 1APBS00256

This performance brake rotor & posi pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • 8 Piece FRONT & REAR Brake Pad Set
  • Direct replacement
  • Premium Posi Semi-Metallic brake pads

Brake Rotor Specifications:

  • Comes as a set of 4
    • Includes both LH (Driver) & RH (Passenger) Side FRONT & REAR
  • Cross drilled, Slotted, And Zinc Coated
  • 6 Wheel Stud Holes
  • Direct replacement

NOTE: For 2007 Silverado and Sierra Pickup trucks, Clarification of Classic vs New Body Styles is as follows:

  • Classic Body Style has a crease in the center of the door skin
  • New Body Style has a smooth door skin that does not have a crease

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:07)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:25)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:47)
    • Remove the two 19mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • If only changing the pads, continue to Step 6 and install the new pads
  4. step : Removing the Brake Rotor (2:44)
    • Remove bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, douse the back side with penetrating oil and use two M10 bolts to press the rotor off
  5. step : Installing the New Brake Rotor (4:08)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Clean the caliper bracket with a wire brush
    • Remove the brake pad slides
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on with a flat blade screwdriver
    • Put the bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 100 foot-pounds of torque
  6. step : Installing the New Brake Pads (5:32)
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Grease the brake pads
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 50 foot-pounds of torque
  7. step : Reattaching the Wheel (7:29)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 110 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (7:53)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Jack Stands
  • Floor Jack
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Fluid
  • Mineral Spirits
  • Brake Parts Cleaner
  • Rust Penetrant
  • White Grease
  • M10 x 7cm bolts

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)

  • Sockets - Metric

  • 22mm Socket
  • 19mm Socket
  • 18mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Great Merchandise
I can surely tell i have a great set of brakes and rotors on my suv (07 tahoe). The response on the brakes are almost doubled from the ceramic brakes i had on there prior. FYI my old brakes where only used up 5%, so there was a lot of life left in them. However the rotors alone are great but paired with the semi metallic kit it made stopping that much better.
September 17, 2017
Purchased
5 months ago
Best purchase
I bought breaks, routers, head lamps and a couple of other items everything was top notch perfect fit extremely happy. I know we’re to go for good reasonable prices parts now thank you great service as well.
December 20, 2017
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(08:17 min)

Tools List:

    General Tools

  • Wire Brush
  • Jack Stands
  • Floor Jack
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Fluid
  • Mineral Spirits
  • Brake Parts Cleaner
  • Rust Penetrant
  • White Grease
  • M10 x 7cm bolts

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)

  • Sockets - Metric

  • 22mm Socket
  • 19mm Socket
  • 18mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver



This part replaces:

  • Nakamoto MD1092, MD1194, 55097-DSZ, 55133-DSZ

Vehicle Fit

  • 2007 Cadillac Escalade Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
  • 2007 Cadillac Escalade ESV Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
  • 2007 Cadillac Escalade EXT Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
  • 2007 Chevy Avalanche 1500 Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
  • 2007 Chevy Suburban 1500 Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
  • 2007 Chevy Tahoe Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
  • 2007 GMC Yukon Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
  • 2007 GMC Yukon XL 1500 Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
Part #: 1APBS00256

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD1092, MD1194, 55097-DSZ, 55133-DSZ

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More