Replaces

2007 Brake Kit Nakamoto MD1092, MD1194, 55097, 25832103 - 1ABFS01475

This brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • 8 Piece FRONT & REAR Brake Pad Set
  • Includes shims
  • Direct replacements
  • Professional Grade SEMI-METALLIC Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Replaces dealer part numbers: 1770918, 15792634, 25819670, 25832103, 88963556
  • Fit 6 Stud Wheels
  • Direct replacements

This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Step 1: Remove the Wheel (1:56)
    • Remove the lug nut caps and center cap.
    • Loosen the lug nuts on the wheel.
    • Lift the vehicle using jack stands.
    • Remove the lug nuts and pull the wheel off.
    • Turn the wheel so you can access the brakes easily.
  2. step : Step 2: Removing the Brakes (2:16)
    • Remove the two 19mm bolts on the back of the caliper.
    • Lift the caliper up and set it aside.
    • Remove the brake pads.
    • Make sure the slide pins on the back of the bracket slide in and out easily. If not remove them and grease them.
    • Remove the two 18mm bolts on the back of the bracket. Use the breaker bar for extra leverage.
    • Thread the lug nuts on by a few threads.
    • Hit the disk to loosen it. Hit from the front then on the back, turning the rotor and hitting it again.
    • Remove the lug nuts and rotor.
  3. step : Step 3: Installing New Brakes (6:32)
    • Slide the rotor into place.
    • Clean the bracket with a wire brush.
    • Put the bracket back into place and start the bolts.
    • Replace the nuts on the rotor.
    • Tighten the bracket bolts to 90-95ft/lbs.
    • Clean the old slides (if the pads did not come with new slides) with a wire brush then put them back into place.
    • Replace the brake pads. The larger one goes on the back.
    • Put the old inner pad into the caliper and use a C-Clamp to reset the caliper. Tighten the C-clamp to push the pistons back into the caliper.
    • Put the caliper down over the brake pads.
    • Replace the 19mm bolts that hold the caliper to the slides. Tighten to 55-60ft/lbs.
  4. step : Step 4: Replacing the Wheel (9:53)
    • Straighten the wheel.
    • Replace the wheel and tire.
    • Thread the lug nuts.
    • Lower the vehicle.
    • Tighten the lug nuts in a crossing pattern.
    • Replace the caps and trim.
  5. step : Step 5: Prep the Brakes (10:39)
    • Pump the brakes a few times until the pedal is firm.

Tools needed for replacement:

    General Tools

  • Chisel
  • Jack Stands
  • Large C-Clamp
  • Sledge Hammer
  • Wire Brush

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket
  • 22mm Socket

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
1
0
0
0
Nakamoto Brake and Rotor Kit
Swapped these out in a few hours on a 2007 Yukon Denali. A couple small imperfections on the rotors, but doesn't seem to affect performance. Solid product for the price and the 1A Auto video made installation a breeze. Brakes feel solid and no more squeaking!
April 4, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007 Cadillac Escalade Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2007 Cadillac Escalade ESV Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2007 Cadillac Escalade EXT Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2007 Chevy Avalanche 1500 Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2007 Chevy Suburban 1500 Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2007 Chevy Tahoe (excluding Police Package) Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2007 GMC Yukon Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2007 GMC Yukon XL 1500 Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto

This part replaces:

  • Nakamoto MD1092, MD1194, 55097, 25832103
Part #: 1ABFS01475

Out of Stock

Nakamoto
Brand #: MD1092, MD1194, 55097, 25832103

How-to Video:

(11:06 min)