Replaces
Replaces Infiniti G25 G35 G37 Q40 Driver & Passenger Side Outer 2 Piece Performance Tail Light Set DEPO 325-1901FXAS-C
$264.95
Replaces 2002-06 Dodge Ram 1500 2500 3500 Driver & Passenger Side 2 Piece Tail Light Set DIY Solutions LHT07409
$73.95
Replaces 2006-09 Ford Fusion Driver & Passenger Side Outer 2 Piece Tail Light Set DEPO 1ALTP01444
$137.95
Replaces GMC Driver & Passenger Side 2 Piece Tail Light Set Eagle Eyes GM632-U0002-SD3V
$144.95
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Okay, friends, to get started on the tail lamp, of course, we're gonna have the tailgate up. We're gonna remove our two mounting bolts right here, using a little Torx bit. Next thing we need to do is use a nice plastic trim tool. I'm gonna come along the edge right here behind the lens and just kind of help pop it out a little bit. Do the same down this way.
Let's move along this outer aspect. There we are. On the backside of that lamp, you're gonna see some connectors. Let's go ahead and twist these, remove the bulb. You wanna check it and make sure it's in good condition. Now is the perfect time to go ahead and replace them if need be. This one, as you can tell, is in pretty poor condition. I should replace that.
All right, friends. Now it's time to install our brand-new lamp. Press that in there, turn that in there. Now let's go ahead and line up our little pitons with the connecting holes. Slide this in. All right, once we have it lined up, a nice loving bonk, and then, of course, our two mounting screws. All right, let's go ahead and test it. Perfect.
