2007-15 Toyota Tundra Exterior Door Handle - 1ADHE00639

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Color:   Black
  • Finish:   Smooth - Paint to Match


  • Fits LH (Driver Side) Rear Door
  • Flush Style Handle
  • Smooth Black Finish
  • Durable construction
  • Direct replacement
  • Built to strict quality control standards
  • Fits Extended Cab models only

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Rear Door Panel (0:23)
    • Pry up the window switch
    • Disconnect the wiring harness
    • Pry out the plastic trim from behind the door panel
    • Pry up the felt mat from the door panel
    • Remove the Phillips screw behind the door panel
    • Remove the Phillips screw from the door pull
    • Remove the clip from the door panel
    • Pry out the door panel
    • Lift the door panel up and off
    • Disconnect the door handle cables
  2. step : Removing the Exterior Door Handle (3:15)
    • Pull the two rubber plugs out of the door
    • Disconnect the yellow clip on the door latch rod
    • Pull the rod out of the door handle with a trim tool
    • While holding the door handle, remove the two 10mm nuts from the back of the handle
    • Pull the door handle off the outside of the door
  3. step : Installing the Exterior Door Handle (5:19)
    • Put the door handle into the door, using the studs to locate it
    • Install the two 10mm nuts onto the door handle
    • Clip the latch rod onto the door handle
    • Clip the yellow clip onto the latch rod
    • Push the rubber plugs into the door
  4. step : Installing the Rear Door Panel (6:38)
    • Connect the door handle cables
    • Lift the door handle into place
    • Clip the door panel into place
    • Tighten the Phillips screw to the door pull
    • Tighten the Phillips screw to the door handle
    • Press the felt mat to the door pull
    • Press the plastic trim behind the door handle
    • Connect the wiring harness to the switch
    • Press the switch on

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2007-2015Toyota Tundra Toyota Tundra Extended Cab Rear Black Smooth - Paint to Match Flush Mounted Exterior Door Handle Driver Side
Part #: 1ADHE00639

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout